[demo11x]

I have an sl66 that has the maniac board in it. When I have the display on peak perfmance shot counter, it wont go over 10bps. Its not just me, a couple guys have tried. Just wondering if there is any way I can reset the board? The psp mode wont go over 10 bps either. Is that just what the board settings are?

[bballcrzy008]

Hey bill. When i air up my ego 11 air comes out of the the hole on the inline regulator on the front grip. Is this normal? I have little air in my tank(like 500 almost 0) so could this be why? Or is there a broken O-ring?

[Bill]

Originally Posted by demo11x

I have an sl66 that has the maniac board in it. When I have the display on peak perfmance shot counter, it wont go over 10bps. Its not just me, a couple guys have tried. Just wondering if there is any way I can reset the board? The psp mode wont go over 10 bps either. Is that just what the board settings are?

If you are dry firing it will not go over 10 bps. You need to be using training mode or use paint/air to get a more accurate reading. Dry firing will default the BPS to 10bps.

[Bill]

Originally Posted by bballcrzy008

Hey bill. When i air up my ego 11 air comes out of the the hole on the inline regulator on the front grip. Is this normal? I have little air in my tank(like 500 almost 0) so could this be why? Or is there a broken O-ring?

Try it with more PSI. If still doing it you may want to change out the #8 oring inside the HPR adjuster piston.

[BiG MaN KemP]

Originally Posted by Bill

I would still recommend swapping out the piston.

Tried using a different reg (Hyper 2 and a Gen 1 CP). Same problem occurs.

So its definitely not the Hpr or its piston....

[Bill]

Originally Posted by BiG MaN KemP

Hi Bill, recently my buddies Ego 10 has been having major issues. It's like FSDO but for every shot. Stock dwell, LPR is flush, HPR to chrono (before it was having issues). Rammer oiled with Eclipse oil, HPR and LPR lubed with Hater Sauce. When it does fire right the first four shots experience FSDO and after that the rest are fine....until you stop shooting, then the FSDO returns immediately. What could be wrong?

- Try a new brand name battery. It usually is the opposite reaction but oive it a go.

-If it isnt the HPR it could be the LPR. Check the piston seal. Also make sure both springs are there.

-Check the pilot orings inside the solenoid. use a VERY small amount of PE grease. VERY small amount. Check where is screws into the solenoid body. Make sure there is no debris.

[GabrielMRamirez]

Sorry, I've asked this twince. I cant find an answer to it. If you have answered this one already, sorry.

Bill, thank you,

Ego 11 - won't shoot over 260 fps

I changed all the o-rings, lubed and oiled everything that needs it. Brand new Duracell battery. What should I do now? Still wont shot over 260.

[Bill]

Did you change the small #8 oring that is very difficult to get to in the HPR adjuster assembly? Also, try flipping the seat over while you have it apart.

Also, up your dwell by 1ms.

[BiG MaN KemP]

Originally Posted by Bill

- Try a new brand name battery. It usually is the opposite reaction but oive it a go.

-If it isnt the HPR it could be the LPR. Check the piston seal. Also make sure both springs are there.

-Check the pilot orings inside the solenoid. use a VERY small amount of PE grease. VERY small amount. Check where is screws into the solenoid body. Make sure there is no debris.

-Battery: first thing I tried, usually does the trick in most guns...

-LPR: seal is fine, springs are there and in perfect shape.

-Pilot Valve: took apart the noid and pilot valve last night, relubed and cleaned, no remedy

Got it to where the first shot is FSDO/the rammer doesn't strike the valve piston hard enough... subsequent shots are fine until waiting for about 10-30 seconds then the FSDO/half cycle comes back

[seaneady]

Are there any benifits or draw backs to reg pressure being high mid or low for either the Ego11 and or Geo3 ? Any one of the 3 better and can you explain why or what one would notice between them? Thanks.

[Rangerspb]

I have a pure hunter ego 11 and found that my feedneck has a crack going from the bottom on the front up about 1-2 cm, am I able to get it re-annodized thru pe to cover/seal the crack? I really don't like the idea of my gun having a crack for no good reason.

[Dablad3]

got a new ego 9/10 solenoid for my ego 9, does putting my planks in it do anything or is it good to go? thanks

[ms5107]

How do i turn training mode off on my 05 ego? I never put it on there so i assume the last owner had it like that

[Da1stMONSTERSOBE]

hey again, i just bought the 05/06 ego spool from you last week, it worked really well the first day i installed it, so i de-gassed the gun and when i went to air it up 2 days later it was leaking from the same spot again. What would be causing it to make it leak again?

the HPR has been completely rebuilt cleaned and everything including a new piston.

LPR is 1/2 turn in from flush

BN Energizer battery

please let me know your thoughts. thanks for your time and help!

[ficone]

Hello Bill! Can you please tell me i can use an etek solenoid in my 06 nexus ego? I just saw video on youtube and the person states that he was told by PE tech that he could not but did and it works just fine as long as etek minifold is also used. Can you please let me know if possible and if not why?


Thanks,
Frank

[Bill]

Originally Posted by BiG MaN KemP

-Battery: first thing I tried, usually does the trick in most guns...

-LPR: seal is fine, springs are there and in perfect shape.

-Pilot Valve: took apart the noid and pilot valve last night, relubed and cleaned, no remedy

Got it to where the first shot is FSDO/the rammer doesn't strike the valve piston hard enough... subsequent shots are fine until waiting for about 10-30 seconds then the FSDO/half cycle comes back

I would up your dwell a bit. Could be to low but everything points at the HPR.

[Bill]

Originally Posted by seaneady

Are there any benifits or draw backs to reg pressure being high mid or low for either the Ego11 and or Geo3 ? Any one of the 3 better and can you explain why or what one would notice between them? Thanks.

There is no real difference if your talking tanks as long as you get no drop off at high rates of fire.

[Bill]

Originally Posted by Rangerspb

I have a pure hunter ego 11 and found that my feedneck has a crack going from the bottom on the front up about 1-2 cm, am I able to get it re-annodized thru pe to cover/seal the crack? I really don't like the idea of my gun having a crack for no good reason.

Feedneck cracks are usually from over tightening or from a fall. Unfortunately they are typically not covered under warranty. I would check with gerry.b@planeteclipse.com to be 100% sure.

[Bill]

Originally Posted by Dablad3

got a new ego 9/10 solenoid for my ego 9, does putting my planks in it do anything or is it good to go? thanks

You should take the planks from your original EGO9 noid. They simply drop in.

[Bill]

Originally Posted by ms5107

How do i turn training mode off on my 05 ego? I never put it on there so i assume the last owner had it like that

I do not believe the EGO5 has training mode but if it does, you can switch it to any other preset menu such as Semi or ramp.

[Bill]

Originally Posted by Da1stMONSTERSOBE

hey again, i just bought the 05/06 ego spool from you last week, it worked really well the first day i installed it, so i de-gassed the gun and when i went to air it up 2 days later it was leaking from the same spot again. What would be causing it to make it leak again?

the HPR has been completely rebuilt cleaned and everything including a new piston.

LPR is 1/2 turn in from flush

BN Energizer battery

please let me know your thoughts. thanks for your time and help!

If leaking from between the solenoid and manifold there is debris in the solenoid. Could be the LPR piston but usually the leak would be from the back half of the noid.