[Jinx18]

Clone VX. PSP Mode. Turn on the gun and the first shot shoots 3 times and then it is normal. Anyone have an idea why? All stock settings. Thanks.

[SHOOTNPOO]

Is your activation screw set up real close to the actvation of the micro switch?
Ive seen where activation and post travel set up to close where it will have a half pull on micro switch. We call that the sweet spot of the switch.

[wesr]

I've had 2 clone v2 and vx each have and still do this... No idea why

[(thc)GunSmoke]

first shot from a fresh booted board will shoot 3 shots then it will go to semi 3 shots and into ramp

this only applys to psp burst mode at least this is how it is on my board

[erikguti]

same in my 2 GT

[pjerzy1]

turn the gun on and wait about 2 seconds or so and it wont do that. every clone that i have owned has done this.

[SHOOTNPOO]

Thanks for all the feed back guys, will have it looked into for sure.

[jayrd21]

My gt and my teammates gt do this as well, but I don't see it being an issue.

[SHOOTNPOO]

We dont get that on our 10 team gun

[AznPballin]

I don't get that on my clone VX...hmmm....

[Jinx18]

interesting to hear these results so far

[Mark S.]

Just tested my GT and it does not do it on PSP Ramping, but does do it on PSP Burst.

[Jinx18]

Originally Posted by Mark S.

Just tested my GT and it does not do it on PSP Ramping, but does do it on PSP Burst.

Is this without air too? just the solenoid clicking?

[Mark S.]

Originally Posted by Jinx18

Is this without air too? just the solenoid clicking?

Correct, I didn't try it with air and paint. Just with my finger in the breach.