[IVIonster]

What is it ? and what is it worth ?
THANKS !

[Kbug]

That's a prostock with a pump kit.

[IVIonster]

Originally Posted by Kbug

That's a prostock with a pump kit.

Thanks for the info.. can any one tell me what its value is ?

[Rebel_816]

2004 WGP prostock. all stock other than the CP reg and pump kit.

those guns tend to go around $100-$120 stock..say $140 with the cp reg....and i think thats either a check it or ccm pump kit which im not sure on the values. they are some of the nicer kits though. post down in the cocker section and we should be able to identify them.

overall probably around $150. 03/04 prostocks are pretty solid, they're made well for sure. basically the standard for a good mech cocker. just very common so they arent worth much. the reg is a nice touch though.

edit: oh, and looks like a cp barrel.

[IVIonster]

Originally Posted by Rebel_816

2004 WGP prostock. all stock other than the CP reg and pump kit.

those guns tend to go around $100-$120 stock..say $140 with the cp reg....and i think thats either a check it or ccm pump kit which im not sure on the values. they are some of the nicer kits though. post down in the cocker section and we should be able to identify them.

overall probably around $150. 03/04 prostocks are pretty solid, they're made well for sure. basically the standard for a good mech cocker. just very common so they arent worth much. the reg is a nice touch though.

edit: oh, and looks like a cp barrel.

Thank you sir !!

[R3L]

I think I see an eye cover on the right side, making it a Superstock. Minor point, but worth disclosing.

[IVIonster]

Originally Posted by R3L

I think I see an eye cover on the right side, making it a Superstock. Minor point, but worth disclosing.

whats the diffrence lol ? just the eyecover ?

[new ion?]

Originally Posted by IVIonster

whats the diffrence lol ? just the eyecover ?

superstock = drilled for eye.

[IVIonster]

Originally Posted by new ion?

superstock = drilled for eye.

i think this is a good thing ?

[new ion?]

superstocks were originally (at least planned) to all come with select fire, electronic frames. like a dumbed down e2. the only difference physically between the bodies of the superstocks and the prostocks are the eye hole. so if you wanted to eblade a prostock, you would have to drill an eye hole (if you were running eyes) whereas prostocks already have that done from the factory.

sorry for the long winded explanation.

[IVIonster]

it all makes sense now , THANKS MAN !!!

[new ion?]

no worries!

oops! i meant superstocks have the eye hole drilled from the factory, not prostocks.

[Rebel_816]

they did not make an 04 "superstock". those were the 05's that came stock with SF frames that were the superstock. and prostock as the mech version.

this is an 04 that was drilled for an eblade eye, all 04 prostocks came as mechs. you had the nightkast, e-orracle, and karnivor in 04 that came stock as electros.

[new ion?]

dammit rebel - i knew i should've waited for you.

[IVIonster]

, got it ... What lube is recommended fo the bolt ?

[Ashton S (Banned)]

Originally Posted by IVIonster

, got it ... What lube is recommended fo the bolt ?

Any type of oil.

[Rebel_816]

just put a few drops of oil every now and then into the asa and dry-fire it a bunch. thats all a cocker needs. it will draw the oil through the rest of the gun.

[IVIonster]

How do I fix the farting ?

Also it has a small leak goin through the barrel.(still fires)

[Rebel_816]

the leak is most likely the cupseal or valve o-rings. if oil doesnt fix it it youll need to replace those.

farting would be caused by your spring tension/reg pressure. head over to www.customcockers.com and read the sweetspotting guide for that one.

[IVIonster]

Cup seal ? How do I get to it ?

Does the leak or farting affect performance in any way ?

[Rebel_816]

not really. its just the hammer bouncing off the valve a little bit.