[WGP WORRACLE]

ok the problem i'm having is that the solenoid on my osiris that controls the hammer leaks and keeps the hammer in the extened position whenever there is air through it.
I have tried putting the hose from the lpr in all of the 3 holes, same with the hose to the hammer.
any suggestions?
also if anyone would take apart their Osiris markers and tell me what the information on the side of the solenoid says and which holes the hoses are hooked into from the factory. thanks (pictures help )

[WGP WORRACLE]

please? anybody?

[WGP WORRACLE]

Please, come on guys, I really need some help here. I need to know which hole the input hose plugs into and which hole the output to the ram plugs into. Also if you could the orientation of the spool. Again pictures help.
Thanks

[Polish Guy]

I think you're on your own in most respects - I haven't touched, much less, worked on an Osiris in over a year.

One suggestion I can pose is to go post this in the Misc. Markers forum and the Cocker forum.

[WGP WORRACLE]

yep, I kinda figured that. Just hoping that someone out there still had an osiris laying around that they were willing to take apart for me. oh well.
Oh before I forget, do you know where I can buy a new solenoid? whenever I search the net the only solenoids I ever find are the magnetic ones that are used on regular e-cockers that release the hammer.
Thanks.

[Polish Guy]

My best suggestion is to find Leon_styles on the forums here, but I'm not sure if he's still around or not. He could probably point you in a much clearer direction.

[fiero32v]

if its like a dragun "the one" or an old spyder em1 where it uses a lp air to push a hammer to open the hp valve this might work http://www.airsoldier.com:8080/cgi-b...Code=SOLENOIDS . if not they should have what you need

[WGP WORRACLE]

^^^^^^^^
Sir, I think I love you.........
That was exactly what I was looking for. I even found a diagram of my solenoid that I currently have. So thanks and kudos to you

[majinebz]

angel is wrong. The osiris is a spring operated return ram. You need the first one. The one simular to the one kit noids 4 the spider/dragun. My ram noid on my osiris went bad also. It ended up beign a real real small oring that broke inside?? (dont ask me how, it was like the size of a pencil tip??) PGI fixed it for free but that was like 2 years ago or longer.

[WGP WORRACLE]

hrmmmmm I know that that is the right solenoid because the TES "THE ONE is a spring returned ram as well.
but I will have to go over my solenoid o-rings again, that might be the problem. never thought of that. Thanks for the tip.