|
|
05-21-2003, 07:58 PM
|
#85
|
Guest
|
what kind of double triggers can i put on my tribal? where can i get them?
|
|
|
Sponsored Links
|
Remove Advertisement
|
Advertisement
|
|
05-22-2003, 11:46 AM
|
#86
|
Moderator
Join Date: Jan 2002
Location: Columbia, IL
|
Only Tribal triggers will work. Rich (me262) has some blade triggers that he made up. Pmicocker also has some triggers I think.
|
|
|
05-22-2003, 08:52 PM
|
#87
|
Guest
|
yup got a few pm me or im me (hackaimpass5) if ya want a blade trigger
|
|
|
05-28-2003, 04:52 PM
|
#88
|
~*~*~*~*~*~
Join Date: Jul 2002
Location: 570
|
Quote:
6061 is ideal. 2011, 2024, 7075 will not look like 6061 when finished
|
from Whitewolfairsmithing.com. Which of these types of aluminum is tribal?
|
|
|
05-28-2003, 05:27 PM
|
#89
|
Guest
|
if i had to guess i would say 6061 or 7075
|
|
|
06-05-2003, 07:55 PM
|
#90
|
Guest
|
Jakesak, why would you need to polish the inside of the ram, if the rod only slides on the o-ring that is inside the ram? It seems like you would only need to polish the rod. Just a thought, not a complaint
Thanks,
Edwin
Quote:
Originally posted by jakesak
Polishing the ram:
First take out the ram. (if you dont know, post so we can tell you). Clean it off, see if you can take off the hammer connected to the rod. If so take it off and take off the treaded end on the ram. Next the rod will fall out or you will need to take it out. Clean off every thing. Take polish and make it shine. NOTE: if you have a dremal, this should be easy, put a attachment on and polish everything, it might get messy so do it in a can or box of sort. For polishing the inside of the ram, take a qtip and attach it on the dremal and go at it. Now you can polish the inside of the body if you want. What I did was take a large shochacbob(wooden stick about 1 foot long) and put a cloth at the end and polish the inside. Make sure you get all the stuff out before puting the ram back in. NOw that you have it nice slice and shiny, put RED (thanks Blue ) loctite on the rod that connects to the hammer, put the hammer on. NOTE: make sure the rod is INSIDE THE RAM when loctiting it. let it dry. Put lube on it and put it back in. It should be a nice and smooth action.
God I hate school!
|
Last edited by edwin247 : 06-06-2003 at 07:50 AM.
|
|
|
06-05-2003, 11:00 PM
|
#91
|
Guest
|
POLISHING THE INSIDE OF THE RAM HELPS IN THE HOLE THAT IT SLIDES IN
|
|
|
06-08-2003, 10:37 PM
|
#93
|
Guest
|
"sweet spoting" the reg, how is it done.
|
|
|
06-09-2003, 01:17 PM
|
#94
|
**** Magic
Join Date: Sep 2002
Location: In the Heart of It All
|
Sweet spotting is when you find the optiomum output pressure of the reg. Turn your reg down some, chrono, turn it up, dry fire it some, chrono, turn it up, dry fire, ........ once you peak (aka you turn it up and the velocity drops) turn it back where it was at before and slowly turn the pressure up until it peaks again. Thus you will find the best place for the reg. Most people will do this for cockers, as you can change the spring pressure from the rear of the gun.
__________________
Working Cl*******s
.
I'm not here for a long time...
...I'm here for a good time.
|
|
|
06-16-2003, 11:18 PM
|
#95
|
Guest
|
if i had a leaky cup seal could that cause me to hear a small leak near the noid that wasnt being caused ny the noid? but by air flowing that direction? or am i just stupid?
|
|
|
06-25-2003, 02:49 PM
|
#97
|
Guest
|
when i shoot full atuo with my bbt i will be holding my trigger back. but when i let go and the trigger springs forward and the gun keeps firing. any ideas on how to fix?
|
|
|
06-25-2003, 03:00 PM
|
#98
|
Guest
|
check the trigger screw it may be out to much not allowing the microswitch to go to closed position
|
|
|
06-26-2003, 02:47 PM
|
#99
|
Guest
|
does anyone know where i could see the thory of operation for a tribal? You know the schematics that move and stuff.
|
|
|
06-26-2003, 04:35 PM
|
#100
|
Guest
|
how do you remove the micro switch?
|
|
|
06-26-2003, 05:12 PM
|
#101
|
Join Date: May 2002
Location: SFC
|
knock out the two small pins from the right side to the left side. then remove the entire electronics harness.
__________________
Looking for Nor*Cal/ Momma's Boys Intimidator, Entity Matrix, Tequila Sunrise Matrix, Adrenalin Impulse
|
|
|
07-10-2003, 08:18 AM
|
#102
|
Saved By Grace
Join Date: Jul 2003
Location: Central Kentucky
|
What was the idea of two ball detents?? One in front of the ball, one in back. Won't the bolt hold the ball in place?
__________________
Brian White's Autococker Haiku:
Did it work before?
You messed with it didn't you.
Got what you deserved!
IF YOU HAVE ANY QUESTIONS ABOUT LOCTITE LOOK HERE!! : http://www.loctite.com/int_henkel/loctite_us/binarydata/pdf/lt1475b_DoItRight.pdf
|
|
|
07-10-2003, 12:59 PM
|
#103
|
Moderator
Join Date: Jan 2002
Location: Columbia, IL
|
It was to prevent roll back. Since most all Tribals came with an open face bolt, it allowed the ball to roll back into the bolt and cause another ball to almost come halfway into the breech. With the 2 ball detents arranged like that, it kept the ball from rolling back into the bolt and kept it centered under the feedtube better.
|
|
|
07-21-2003, 01:16 PM
|
#105
|
Guest
|
Is this a Tribal Ram with snap ring?
I would think that the snap ring should replace the threads so you don't have to use Locktite?
Pic on page two of sticky
Quote:
Originally posted by me262
here a pic of the other ram version with the snap ring. (like an angel)
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|