[Xdanisx]

What's the minimum psi my tank reg can be with an AGD Tac one? I know I need high pressure, just not sure if I can skimp with myth reg.

[DMex]

700 at the least. Could go lower with a proper bolt/spring combo but recharge rate is going to suffer big time.

[Xdanisx]

Is a myth reg 600 psi?

[DMex]

regs are all over the place. Put a gauge on it.

[Xdanisx]

I don't have it yet.

If my new tank can't put out enough pressure, I'll just get a ninja shp reg.

Thanks for the help dude.

[renie]

Myth regs are craps for mags 2 that I've had were both under 750 psi u want at least 800 for an xvalve my dxs reg pushes out just under 900 and works a charm

[Xdanisx]

Dang. U guys wouldn'thappen to know what the output pressure of a 5 year old 48/3000 pure anergy tank would be, would ya? No idea what the reg is.

[renie]

It's impossible to say mate without testing though my mates one pushes out just under 850

[Xdanisx]

Ya it was a longshot. Thanks dude.

[Tempted (Banned)]

Seriously, the Mag will be fine on anything other than SLP. You won't get the RT effect below 900 but it won't hurt anything either.

[Skipdogg]

Ninja reg at 650 psi output runs my x valves just fine.