So I know most of us like to keep the color of the stock grips and virtue only has them on black, so here is the solution.
Tools needed
Step 1
Take your stock grip push the Jewell out just a bit to reveal the locking rubber pieces, make sure don't push to hard or the jewel will brake, use the pick to pull the rubber locks off
Step 2
Do the same to the virtue oled grips
Step 3
Use the blade (make sure is sharp) and cut all the rubber locks off, if you leave them is really a pain to get the Jewell back in.
Step 4
Test fit the virtue Jewell in the stock grip to make sure if fits properly, then take it out and apply a small amount of glue on each corner of the jewell and place it in the grip and hold in place hard for the glue to dry
Step 5
Sit back relax and enjoy your new grips, and also swap the color parts if you have to like me going all white.
THE END