[anti55hero]

i got an 05 speed last week, played with it this weekend, and it worked great. But yesterday i was shootin it in demo mode when all the sudden it stopped sensing the trigger being pulled. I adjusted the trigger every way i could but it didnt change anything. It came on and read the trigger pull twice, randomly, but after a few shots stopped sensing it again. Any one know what the problem might be? thanks

[spyderuser123]

check for piched wores. loose wires and any plugs on the board coming loose.

[paintreliever (Banned)]

light

[anti55hero]

i checked all the wires connecting to the board, would any in the gun have any effect on it?

what do you mean light?

[Hintzy]

i think if light hits it somewhere on the back of the grip frame and makes it in to the board the board will sense it and be stupid

[anti55hero]

tried it in the dark, didnt change anything :-/

[blankface]

there is a set screw in the trigger, if that is screwed in to far then it won't sense the trigger being pulled. try backing that out a bit, also do you have any trigger mod on it?

[anti55hero]

its brand new, nothin moded to it, and i have adjusted the trigger and tried it in every position i could

[blankface]

so you adjusted the set screw in the trigger? not just the wheels right?

[anti55hero]

yeah, the set screw, the weels and the set screw and weels together

[blankface]

take it into a local shop/field and see if they can fix it. or read the manual and see if there is anything in there that could help you

[paintreliever (Banned)]

check your eyes..see if they are cleaned...
and get out of demo mode

[anti55hero]

i work at the local shop, it is out of demo mode and the eyes are cleaned haha. i guess this isant a normal angel problem. Im not the angel guy at the shop, but he didnt know the problem either.

[blankface]

email an angel tech, maybe they can help you out