[Agitator]

I'd suggest makin' it in the dragun forums if it's gonna' be a pretty active topic

[beowulf88]

Alright, one question, the auto mode on my dragun is basically a faster semi. Is it supposed to be, and if it is, can i convert it to full auto? I heard you can by removing the eyes and then pluging them back in, but I could use some more details than that. You guys rock for doing this forum btw, its so damn hard to get info on draguns for the most part. thanks

[Dragun_paint]

yea i found that to be true with me to, when i used my tes, i would use it on auto instead of semi, it felt more responsive, and yes you can get a true full auto buy taking out the eye board.

[Dragun_Fly]

My problem is my gun is turning off every time i pull the trigger solutions to that? and i have the problem of no fitting feedneck if you have any ideas even if not clamping will be happy thank you for your time

[pilotacs02]

is the battery old?

[Agitator]

It might be a loose wire or a bad battery.

You should make a thread in the general part of teh dragun forums. You'll get a lot more hits and helpful suggestions

Good luck

[Dragun_Fly]

yeah i made a post in both sections but thanks alot for the help since like i took the gun completly apart to learn the insides of it as well as the outsides and i put it completly back together(not a hard gun to figure out) and then the trigger deal came into play i think some of the wires are bent or somthing because of the shutting off problem and yeah when i was able to fire the weapon it would almost die its lcd screen would fade in and out so if you guys got any ideas feel free to hit me up on this post thanks for your help so far.....oh yeah the batteries i was using were fully charged brand new 9v bats shouldnt get killed in one shot should they?

[beowulf88]

Removed the board, turned it on, it didn't work, I tried like ten differnet combinations of removintg the board and turning it on and all that stuff. any idea's and do ya want me to repost on another thread?

[Agitator]

Your battery is bad, your wire for the battery has been internally damaged, or your capacitor on teh circuit board is faulty...

It almost has to be one of those things.

Your board could be shorting out on something, but removing it, as you did, should rule that out. I suppose the board could be damaged or cracked, but I doubt it.

Good luck!

[beowulf88]

Thanks, it still works for semi, so i'll be fine till i get my pay check and a new board, probably a t-board. Thanks

[Agitator]

np

If you have a t1, I might be able to give you a super-duper deal on a t-board with ultra code

[beowulf88]

I've got a TES thanx though, it was $80 and my dad couldn't pass it up, so now its his gun, but i'll use it till i get my classic timmy together, funny, i'm going to be buying a bunch of boards and harnesses soon lol. are there any aftermarket grips? or am i making my own? cause mine are shot., i'll do a search for that.

[Agitator]

np. just thought I'd ask. I'm an opportunistic tator.
Classic timmy? sick!
That's great your dad plays ball. My dad hates guns and doesn't like paintball... Aftermarket grips? that's been a toughie for all dragun owners. There are some threads about it (if you look a few pages back) in the main portion of the dragun forums

[MPBIGSEXY]

Brother has a TES and basically it keeps auto firing after 3 shots. Its all default setting. It worked well the first time of play, but since then problems. Fixed the ball detent, but now the burping/erratic firing. Messed with the trigger screw and replace the o ring on the striker. Any ideas?? Also anyone here a TES tech at all? I feel bad for him and i have tried alot to get this done but no luck. Any help be great. The only thing the gun has on it outside of stock is a CP short reg. Again thank you to all who applies.

[denimcord]

By no means am I a TES tech but I do own one. I was having the same problem and all it took was a GOOD cleaning and new bolt rings/shocktech superfly derlin bolt. Hope it works out for you as well as it did for me. Good luck!

[p8ntballernwpa]

Here is my updated version of the FAQ. Click on the link Updated-FAQ-for-Dragun-The-One, it is an adobe file so you will have some version of adobe reader.

Let me know if there things I should change or anything like that.

[ChuckSplat]

Do spyder bolts and valves work in The One?

[xXxInFeCtIoUsxazNxXx]

im trying to sell my t.e.s
how much should i sell it for all stock used 3 times

[ToyBox]

Originally Posted by xXxInFeCtIoUsxazNxXx

im trying to sell my t.e.s
how much should i sell it for all stock used 3 times

sell it for $125/$150
try to get the most out of the gun

[paintballer180]

i bought a dragun and i would like some info opn it like threads i can use for it what does it take c02 o hpa anything u can tell me would help heres a pic http://s244.photobucket.com/albums/gg2/paintballer180/

[XxAltecxX]

Everything but the feedneck, and trigger frame are 100% spyder compatible. You can use either co2, or hpa on them.