Since I did not want to cut my original strap off the clip and I do not sew, here is my way of installing a VW strap on a Profiler.
Step 1: Find some sharp flush cutters or a new utility knife and a cutting board
Step 2: Push the strap all the way over to one side and cut a small gap in the center of the clip
Step 3: Slide off the old strap
Step 4: Slide on the new strap - this may take varying amounts of effort depending on your new strap selection - TEST this before you cut your clip
Step 5: Slide the new strap back to the center - reinstall the strap and go play!
Warning/Disclaimer! The fokes at Vforce would probably void the warranty after this mod - Although I used this mod all last winter on my Profiler I cannot guarantee your safety after you perform this mod. Good luck! Be safe! Always wear proper safety equipment while playing paintball!
D-man