salvo rapid fire issue
I bought a new salvo a couple months ago. fielded it twice and it was just fine. then I added a cyclone hopper and e-trigger. after I installed these, I had a problem of the hammer not recocking fully and it would fire bursts or full auto until I manually pull the hammer back to stop it. so I changed out the trigger back to stock, same issue. removed the cyclone, same issue. I have had the gun apart numerous times, making sure all is clean, undamaged and lubed. since this problem has started I have replaced all O-rings, power tube, sear and sear spring. I even tried swapping out the hammer out of my 98c. this thing is driving me nuts! this seems to be a fairly common problem by checking other posts, but I havent seen any solutions yet. any suggestions anyone?