Trilogy Half block

[NA]WARLORD · 03-21-2013, 01:16 AM

So Iam about to purchase a Trilogy that has been half-blocked and convert it to a pump. I am considering the 30.00 ANS pump kit and a hitman lever. I noticed it can be setup for dual pump rods, but where do you get the shorter rods from ?

Sogamember666 · 03-21-2013, 11:51 AM

Machinists.

[NA]WARLORD · 03-21-2013, 08:26 PM

Can you be more specific ?

Bartman · 03-21-2013, 09:41 PM

you will have to find some one that has as hop to cut and thread both ends of a 3/16 rod, so its the right length and

Bart

[NA]WARLORD · 03-22-2013, 11:06 PM

Thanks Bartman.

Sogamember666 · 03-23-2013, 07:11 AM

Hit up JCurt on MCB.

[NA]WARLORD · 03-25-2013, 01:46 PM

Thanks Sogamember666 - I tried that with a pm and a post, no response yet.

wikkid · 03-29-2013, 12:22 AM

Try super_stanchy here on pbn

danssoslow · 04-01-2013, 09:09 PM

Try a local machinist and ask them if they could dye some 10/32 threads for you. Cutting it to the correct length will be no sweat with a Dremel and cut off wheel.