|
|
04-22-2007, 11:51 PM
|
#967
|
|
Quote:
Originally Posted by Tyl3r11
you can do a x mod on a reloader b right??
|
yes...
|
|
|
Sponsored Links
|
Remove Advertisement
|
Advertisement
|
|
04-23-2007, 01:42 AM
|
#968
|
Guest
|
waterdude - yes the PR/staple mods does but not the resistor PR mod, the RPR mod is just like the stock resistor on the board only a lower voltage so you will get more speed with out frying your board.
prem205 - I did a lil test with the HD2 and PD motors. Rec volts you should use HD2 2.3V PD 2.3V. I ran both motors at 18 volts just to see how they would hold up to very very hi voltages. HD2 lasted 3 min before one of the brushes burnt off. PD lasted a lil over 10 min and then the bearing froze. So from what I have been doing with these motors the PD is by far the better motor. As for BPS diff its about 1 or 2.
DrHeLpErZx - screw the speedwhell and go power dash motor then yes but why? I have my halos working off of consistence rather then speed. both of them drop at about 30 -32 with the same speed. I have maxed guns out with them and no gaps or other issues. so I would go with PD motor bone delrin cone and a v35 if you want.
hipertec - the spring under the sone helps alot, its so that the balls are fed at a consistent rate. the spring in the cup is to help stop jamming(got me how)
1stezekiel - he was asking the difference in motors speed HD2 vs PD
xmc1146 - PD's and xmods ae abut the same but what he was saying is that some xmods motor dont wokr as well as other I think. all I know is that the yellow xmods and the PD are about the same.
|
|
|
04-23-2007, 06:19 AM
|
#969
|
Join Date: Jun 2006
Location: Tampa,Fl
|
Quote:
Originally Posted by m_dogg2021
Vegeta_ss4 - bad connection AKA the boards pins are bent. Or in the connector the sleeve isnt crimped so its not making a good connecting with the board. The other issue could be just low batteries (the HD2 will only make your halo jam if the voltage gos under 7.5V
Wf_tippmann_ - lol 1st page 1st post.
|
Hay M_dogg could it be from the power wires from the battery being pinched ? I got the Halo used and the guy who owned it pinched them while installing a new shell or something . I'm thinking maybe it's not getting the full current from the battery pack?
|
|
|
04-23-2007, 07:05 AM
|
#970
|
UNA VERGASO EN LA CHOMPA!
Join Date: May 2004
Location: TEXAS
|
Quote:
Originally Posted by m_dogg2021
1stezekiel - he was asking the difference in motors speed HD2 vs PD
|
yah, i missed part of the convo.......i apologize .
__________________
if your married and got kids, and wished your mom and dad still payed for your paintball stuff.....put this in your sig.
old feedback system
new system
"00"
"GOOF"
" BALISTIK"
|
|
|
04-23-2007, 09:51 PM
|
#971
|
Guest
|
Vegeta_ss4 - yea that owuld do it. you can do one of 3 things, #1 take the harness and cut it about 1/2" from the connector and solder on new wires and 9V connector. #2 cut the pinched parts off and solder new peices of wire in there. and #3 buy a new harness.
1stezekiel - I dont care your helping
|
|
|
04-23-2007, 09:53 PM
|
#972
|
Join Date: Jun 2006
Location: Tampa,Fl
|
Quote:
Originally Posted by m_dogg2021
Vegeta_ss4 - yea that owuld do it. you can do one of 3 things, #1 take the harness and cut it about 1/2" from the connector and solder on new wires and 9V connector. #2 cut the pinched parts off and solder new peices of wire in there. and #3 buy a new harness.
1stezekiel - I dont care your helping
|
Thanks M_dogg ! I'll give it a try bro .
|
|
|
04-23-2007, 11:32 PM
|
#973
|
DatsunAholic
Join Date: Aug 2006
Location: Arlington, Texas
|
So, i think i missed something. Which motor, out of the hyperdash2, and the powerdash is the fastest?
|
|
|
04-24-2007, 01:21 AM
|
#974
|
Dirtbag
Join Date: Apr 2005
Location: 262 Wisconsin
|
Pd
__________________
We cant stop here, this is bat country.
PbN+OC=Ban
There is a time for war - Ecclesiastes 3:8
PbN
Si Vis Pacem Para Bellum
"Originally posted by adamb2k2: Canfield you're a ****ing *******."
|
|
|
04-24-2007, 02:51 PM
|
#975
|
Join Date: Oct 2004
Location: Michigan
|
ok i played 2006 chicago and after the event i didnt even touch my halo. everything worked fine up until the last game. it has a victory board. i went to go play last weekend and it wouldnt turn on. i knew the batteries would be dead so i changed the batteries. after changing the batteries the halo still wouldn't work. to make sure it was the batteries, i took a battery pack from my brothers hopper and plugged it on my hopper and it worked. i plugged my battery back in and it didnt. i put new batteries in so i dunno whats going on.... could it be the battery pack?? like i dont see what could be wrong it worked at chicago and i never touched it and now it doesnt work.... any help is appreciated.
__________________
"When you win, say nothing, when you lose, say less"
-Paul Brown
|
|
|
04-24-2007, 02:58 PM
|
#976
|
Give your Halo The BONE!
Join Date: Nov 2003
Location: Texas
|
Is it the stock black AA clip that you install AAs into?
Try gently pushing the larger female terminals with slits back to gether on both your pack and Halo as they sometimes spread out and loose connection.
If that doesn't work, then you may have a bad clip as things do wear out.
Good luck,
Matt
|
|
|
04-24-2007, 03:35 PM
|
#977
|
UNA VERGASO EN LA CHOMPA!
Join Date: May 2004
Location: TEXAS
|
hey m dogg.... i know its been asked before, but why exactly will a speedwheel NOT work with the hd2 ? thanx .
__________________
if your married and got kids, and wished your mom and dad still payed for your paintball stuff.....put this in your sig.
old feedback system
new system
"00"
"GOOF"
" BALISTIK"
|
|
|
04-24-2007, 06:23 PM
|
#978
|
|
Quote:
Originally Posted by 1stezekiel
hey m dogg.... i know its been asked before, but why exactly will a speedwheel NOT work with the hd2 ? thanx .
|
my guess is hd2 has low torque so speed wheel puts more rpm but also takes the torque out. halo or any loaders needs torque to push the balls around to feed. its like a bicycle going up hill. you switch it to a big gear and you keep peddling fast but actually your moving slow.
|
|
|
04-24-2007, 06:49 PM
|
#979
|
StefanThePro
Join Date: Oct 2006
Location: Toronto
|
good analogy/
__________________
[[[Pro Sponsored]]] Eat. Sleep. Bunker.
Full Body Creation, Machining, Anodizing and Repair + Parts and Service Available
Pods now only $1.00! 07 EGO|Hybrid NXT|PM6|RPM|PMR|3 Quest's
|
|
|
04-24-2007, 09:46 PM
|
#980
|
Guest
|
1stezekiel - well there are 2 things why it sucks #1 what xmc1146 said and you jam at 8.5V, #2 it has bad tendency to fri your board due to the fact that the motor is just asking for to much amps out of the board. Just so you know:
Halo board = 1 amp MAX
HD2 = 2 amp max
and PD motor = 2.5 amp max
so the motor is asking for far to many amps then the board will kick out.
xmc1146 - very well done but thats only half the problem.
|
|
|
04-24-2007, 10:17 PM
|
#981
|
UNA VERGASO EN LA CHOMPA!
Join Date: May 2004
Location: TEXAS
|
good enough, thanx .
__________________
if your married and got kids, and wished your mom and dad still payed for your paintball stuff.....put this in your sig.
old feedback system
new system
"00"
"GOOF"
" BALISTIK"
|
|
|
04-26-2007, 12:31 PM
|
#982
|
|
wheres the rubberband mod?
|
|
|
04-26-2007, 09:33 PM
|
#983
|
Guest
|
shortstack20 - very very lame but you are right I have skipped over that. if you want you can write the mod for the halo and ill whip your name up there for all to see.
|
|
|
04-26-2007, 11:31 PM
|
#984
|
Join Date: Aug 2006
Location: So Cal
|
Pinched wires bad? Why?
|
|
|
04-27-2007, 09:15 AM
|
#985
|
Dirtbag
Join Date: Apr 2005
Location: 262 Wisconsin
|
Cuts the electrical connection thats why.
__________________
We cant stop here, this is bat country.
PbN+OC=Ban
There is a time for war - Ecclesiastes 3:8
PbN
Si Vis Pacem Para Bellum
"Originally posted by adamb2k2: Canfield you're a ****ing *******."
|
|
|
04-27-2007, 09:55 AM
|
#986
|
UNA VERGASO EN LA CHOMPA!
Join Date: May 2004
Location: TEXAS
|
Quote:
Originally Posted by prem205
Pinched wires bad? Why?
|
high resistance, just like a river with a damn in it ...........take out the damn and whoooosh .........
__________________
if your married and got kids, and wished your mom and dad still payed for your paintball stuff.....put this in your sig.
old feedback system
new system
"00"
"GOOF"
" BALISTIK"
|
|
|
04-27-2007, 05:23 PM
|
#987
|
|
Quote:
Originally Posted by m_dogg2021
shortstack20 - very very lame but you are right I have skipped over that. if you want you can write the mod for the halo and ill whip your name up there for all to see.
|
no i need to know how to do it haha
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|