[beansunited1234]

ok, the gun shoots, but there is a leak and the pressure goes up really really high, then drops down to 0 in like 4 shots. I can't make the gauge stay at 180-200. Please help with any information, and how to do it.

[Schtuff]

well, somethings broken

[ACE159]

you got me

[Mr Virus]

First off...screw in your velocity adjuster clockwise til it stops.
Now...back it out two full turns.
This will seat the poppet properly.

Next....screw in your tank, and make sure that the tank is screwed in completely.
Thats why your leaking down the barrel, and the pressure is dropping.

If the pressure keeps climbing past 200 psi, youll need to remove the regulator adjustment screw, and retune the regulator.
Review the disassembly/reassembly videos found in the stickies.
It will guide you through the necessary steps to retune the regulator.

[beansunited1234]

Thanks mr virus, will tr tuning my reg, that is what i thought it was but i didn't know how to fix a mini reg. Thanks a ton, but still pst more segestions.