[jdiby17]

i went to my feild today and my fusion wouldnt shoot for about the first 30 trgger pulls then it shot for about10 balls then if i waited about 5 seconds i'd have to pull the trigger 3 times to get 1 ball out.what is wrong,bolt stick?

[fds]

it could be your trigger, adjust it out. To make sure of this turn gun on with no air, turn eyes off and see if this does the same thing. I dobt it is bolt stick and lube everything HPR,LPR,Striker

Fresh batterys

[ownage312]

Battery.

[jdiby17]

ive done everything ive lubed the regs and striker new batterys and is your noid quieter when u are running air through it

[fds]

I don't hear my noid when i shoot never really tried to.

Did you try to adjust your trigger?

[jdiby17]

yes i tryed and i see the light click when i pull it but i hear like a tiny plopping noise inside my gun and then after about 5 pulls it fires and if i just are my gun up i cant hear the noid

[Rhino1XL]

Try these.... in this order.

1. battery... fresh, new duracell or energizer

if that dosen't work try #2

2. pull the connector to the solenoid out of the circut board, then re-install the connector to the board. (make sure gun is off)

if it still dosen't work..... try #3

3. contact DP service.

Rhino