[bracer028]

how are they compared to blackheart?

[Ydna]

what specifcally about it? Blackhearts are lower on the chain of aftermarket boards since they offer mainly a couple added adjustments. Other adftermarket boards offer more in terms of features and control.

But an ino will shoot the same regardless of the board.

[bracer028]

does the tadao fit the epi?

[Ydna]

Yes, any ion board will work as long as the solenoid is the correct one (epiph solenoid)

[bracer028]

if i change my internals of my epi, would it drop to the lower psi that is comparable to the ion?

[christhered]

if you change the internals of the epi, you lose the benefit of having an epi. ie. the high operating pressure allows it to be more efficient in stock form. once you start modding it, the internals allow it to be much better than any up'd ion, but you get a little more kick in the trade off.

[bracer028]

what part of the epi with ion internals make it operate at higher pressure?

[Ydna]

the fire chamber and solenoid, also a different (higher pressure) qev to be safe.

[bracer028]

what if i get the 360 and the firebolt which is also interchangeable with the ion...will it get under around say 170 psi?

[Bioshock]

Originally Posted by bracer028

what if i get the 360 and the firebolt which is also interchangeable with the ion...will it get under around say 170 psi?

The Epiphany comes stock with the Firebolt.

[fblainen11]

Originally Posted by Ydna

the fire chamber and solenoid, also a different (higher pressure) qev to be safe.

and the different reg spring...thats the main difference.
thats the first thing that makes it a different pressure.

all the other parts that he said had to be modified from the ion to handle the higher pressure.