[Vegeta_ss4]

Originally Posted by jhula13

You probably havent used one then Pal. Its kind of like the earth is flat syndrome.People get conditioned to something and it's hard to accept change

Sure have and I hated it . WAY too UGLY ! The only reason you posted this in the Halo thread was to start an argument . I'd never show up to a tourney using a Fasta cause I'd get laughed off the field with that ugly thing. Just my 2 cents !

[mtbrdude]

how many BPS faster would a HD or PD motor be over a stock halo motor?

[xmc1146]

Originally Posted by mtbrdude

how many BPS faster would a HD or PD motor be over a stock halo motor?

about 4-5 with regular alkaline 8.4 volts 17-19 bps. with bone its 8-9 w/ 9.6 volts 25-26 bps this is constant. depending on a voltage of the battery.
atleast this is for my test on the HD. with my xmod im putting out 28bps. im not sure about PD. someone says PD is better than Xmod but im not sure.

[mtbrdude]

well with my v35 i get a drop test into a pod at about 22-23 bps right now... That's with normal energizer batteries...
So with the HD i'd be seeing closer to 28 with normal batteries?

[dueydog]

Originally Posted by mtbrdude

well with my v35 i get a drop test into a pod at about 22-23 bps right now... That's with normal energizer batteries...
So with the HD i'd be seeing closer to 28 with normal batteries?

No matter how many high performance parts you put on your loader or sports car, if you keep using cheap, crap fuel it will not perform best. Batteries are fuel. The better the fuel, the more speed.

Stock Zboard, Alkaline AAs, stock motor = 18 bps.
Stock Zboard, BONE, stock motor = 24 bps.
Victory board, BONE, stock motor = 28 bps.
Stock Zboard, BONE, add HD2 or PD = 30 bps.

Here's some independent info:
http://www.painthr.com/index.php?opt... id=33&lang=en
https://www.pbnation.com/showthread.php?t=1201483
http://www.zippyvideos.com/411784253...the_bone_test/
http://video.google.com/videoplay?do...60942260235611

Good luck,
Matt

[mtbrdude]

hmmm very interesting
If i start playing enough i'll grab a bone from ya... but right now it's cheaper just to buy non-recharables, seeing as how i've got little money and little time on my hands.

[Ieo]

so....would a shocktech three paddle aluminum cone fix the blender action of a v35 with Bone pack, HD2 AND speedwheel? I don't like the thought of my speedwheel sitting in the toolkit, and I need a new cone anyways.

[remaxxxk]

I plan on doing the intelli feed mod, anyone have the relay and switch part number from radio shack? A picture of which wire connect to which point of relay would help a lot too.
thnaks in advance.

[CanfieldOO7]

Originally Posted by Ieo

so....would a shocktech three paddle aluminum cone fix the blender action of a v35 with Bone pack, HD2 AND speedwheel? I don't like the thought of my speedwheel sitting in the toolkit, and I need a new cone anyways.

Yes. I just got one from a tourney and it solved alot of the ping ponging of the balls in the hopper. Careful though because on a B2 it can be sensitive enough to make the cone keep spinning due to the noise of the AL paddle.

[rcracerlol]

ok here is my experience with my combo powerdash motor,shocktech hot rod kit,hybrid shells,bone battery pack,stock halo board/B2 board=Fried

so the stock board didnt handle it too well so it burnt...
Bought a new board the B2 for a good amount of $ that fried also

Someone tell me what is wrong

[dueydog]

Originally Posted by rcracerlol

ok here is my experience with my combo powerdash motor,shocktech hot rod kit,hybrid shells,bone battery pack,stock halo board/B2 board=Fried

so the stock board didnt handle it too well so it burnt...
Bought a new board the B2 for a good amount of $ that fried also

Someone tell me what is wrong

If states everywhere not to use speed wheels as they cause issues.

Reloader boards are also very cheaply and in combnation with that motor, good power and speed wheel is a combo of death. Mdogg states the same thing.

Speed wheels mess with the load and torque on the motor and heat of the board even more.

Good luck,
Matt

[rcracerlol]

welps thats a big lesson i just learned thx man...

[Ieo]

Just an FYI:

There isn't a resistor on the stock motor....there is, however, a capacitor. It's a 0.1uF (code 104) CAPACITOR which is easily found at radioshack.

This info comes from Jamie, the guy behind Nox Boards.

[CanfieldOO7]

I told him that already. I think he just forgot to change it in the posts.

[m_dogg2021]

remaxxxk - To tell you the intellyfeed is just to look cool and really is kind of useless. I have tryed to make it worth my time but just upgrading your halo will work much better. Oh and BTW you can only use the halo for one gun or you have to mod all of your guns for just that halo.

dueydog - Thank you soo much for taking care of my thread!

Ieo - really I thought they where 103's and yea I know i just havint had the time to change that in my thread, Infact I think ill do that right now!

[p8nt4brainz]

My stock motor came with a 104 (0.1uF cap), but i have seen others with a 103 (0.01uF). Not much difference really as they are there to reduce radio interference from arcing at the brushes and both will work.

[Michael13]

how fast does a stock halo B feed?

[xmc1146]

it start off with a 19 with a new regular battery and throttles down to 17 after just a few cases.

[m_dogg2021]

p8nt4brainz - really? lol I put 104 on the HD2, PD and xmods but thats only because radio shack doesnt have the 103's.

Michael13 - what he said /\/\/\/\/\

[Made in China]

when i did the x mods mod to both my halos i just used the transister already on it and instaed of taking the time to pop out the stock halos pin and switch them i just took a little gray thing from a k-nex sanded the inside and broke the teeth of the x mods pinion then super glued it on and they have both worked wonderfull about 30 bps with new batts

[m_dogg2021]

Made in China - lol I have done that before but most ppl dont have spaire pinions sitting around witch is why I did the stock one.