Good news for all of you as broke as me. I have come up with a way to get a cocker lpr onto your Wrath, without that $25 Zenitram piece, for about three bucks. It's really quite simple.
First, go to a hardware store in the plumbing section and pick up a
3/8" male to 1/8" male (female if possible here, I couldnt find one) fitting and a
1/8" female to 1/8" female fitting.
EDIT: There IS a 1-Piece, nearly invisible (about 1/4" exposed) fitting for this. Look at a hardware store for a 3/8" x 1/8" hex bushing. Mine came with some nuts on the end, but you can toss those aside. Next, put the 3/8" male end of the first fitting into the breech where the stock lpr was, and then either put a 90* fitting on (then the 2nd fiting) or just go straight out with the female to female fitting. Make sure to teflon or loctite it, then put on the ASA of your choice! Im going to try painting it black to make it more invisible, stay tuned for results.
Two other ideas i had involved tapping a 1/8" hole in a 3/8" plug and taking the 1/8" threaded part of the lpr off and threading it directly on the fitting. I'd be interested to see how it turns out if you do either of these or somthing else of your own making, so post results! However you choose to do it, good luck.
Sorry for the poor quality pics, and know in adance that i think the color of the FGP looks crappy too, I'm going to paint or replace it in the ner future.
.JPG)
.JPG)
.JPG)
Your Privacy Choices