[Huffman///]

Ok my legend board turns on, programing mode is working. However you can not turn off the eyes. Otherwise the board lights up fine. Also the gun will not air up. I know it's going passed the cp reg, just not any further. I checked for kinked hoses. Any help?

[Txvman]

Not sure on the eye problem. The air goes thru the reg to one side of the poppet valve and to the solenoid. Is the solenoid clicking?

[Huffman///]

No it's not clicking, the gun just came back from infinity. I was hoping it wouldn't be the noid, really hoping. I don't want to send it back in again.

[wow-e-wow-woo-wow]

change ur batt, even if teh one in it is bnib. its real hard to break legend noids. its prob just a bttery

[Huffman///]

changed the battery multiple times....

[HateR22]

damn you just got the gun back from infinity and it doesnt work, that suckss

[Txvman]

Try resetting the board to stock settings. Also check the wires connected to the noid, if they are covered with shrink tubing you may have to cut it off. Could be one of the wires broke loose from the solder. It's very easy to fix. Man wish I had the money to take it off your hands. I'd love to have a second Legend.

[Huffman///]

already re set the board, I'll try the wire thing though.

[Huffman///]

wires to the noid are not covered in shrink tubing, my valve o-rings are fine, all internal o-rings are fine, hoses are fine. the gun reads that there is a ball in place, but it won't fire? Im going to send it to infinity.