[Dismas03]

Anyone know a place near Tampa, Fl that would completely rebuild my Raven Nexion? It's leaking in so many places it needs some serious TLC. An O-rink kit simple won't do it.

[theblindchicken]

Spyder/STBB based markers are relatively simple in terms of repair.

If they rebuild it.. they'll most likely just replace all of the orings.

All it probably needs is new orings and some oil lubricant.

So, you'd save your self money if you just replaced the orings yourself.
Also, most likely any local shop will repair/rebuild any marker you bring in.

edit: And they may alter they springs as well.

[K_Group]

http://www.ansgear.com/Kingman_Spyde...rebuildkit.htm

This kit should take care of everything. If it still leaking, give our tech support a call at 888-546-4626. Press 0 for the operator and she will get you a tech to help you out.

[Dismas03]

I'll try the orings again. But It's leaking from every which way. might need a new asa, it's leaking from tiny holes everywhere. lol

[theblindchicken]

If orings don't fix everything, you can use teflon tape/plumbers tape on the threading as well.

Put a little bit of oil or grease lubricant on the static (non-moving) orings and only use oil on the dynamic (moving) orings.