[teh_ion]

you don't need the plastic clearcoat because the normal clearcoat sticks to the paint

[dyeplaya03]

ok so your saying just put on the plastic paint and forget bout the clear coat being the paint i have says non-flaking

[benjabino]

Originally Posted by aceofspades05

HAWT!!! I WANT!!!!

[ranfx]

hey, i'm going to do this tomorrow. and i was wondering if it would be a good idea to let it dry in a warm dry place ie: oven on low with the door open.

so i.... clean my mask very well with OOPS. i'll apply a light layer of adhesion promoter and let it sit in the oven for a while. i'll tape it up. then i'll follow ace's method of patient painting with white DUPLI-COLOR, about 7 light coats. and then 2 coats of clear coat. and i think i'll let it sit in the oven over night.

what do you think?

[dimewitamind]

i did this to my avatar and it looks BEAST. i mean godly.. it rocks. the vents "fang" parts are soo cool looking white. like real teeth. lol

[egosOWNshockers]

?????
if i have a blue vforce and i want to paint the black part of it red. than do i have to paint it white, let it dry, than paint it red over?

[Proto16]

I know most people don't have access to this but, there's this stuff called Mathew's Spray Bond, it's for bonding automotive paint to plastic. I used PPG paints which are normally used on cars along with the clearcoat. This gives me way more color options and the ability to add airbrushed effects. This is my proto I did using a white basecoat and the color is medium aluminum gold. If you know anyone who paints cars they can do this. Or if you want i can do it. Just pm me.

[egosOWNshockers]

looks sick

[octane89]

The start of my Axis Frame...

[leggo_my_ EGO]

my flex frames keeps on chippings...wat do i do??

[painteater19]

Spray 7-8 thin coats at 8-12 inches away from the surface. Let it dry overnight.

[KRaven]

hey anyone know any wheys to remove paint with precision any tips and what did u use to do it...only askeing because some paint got under my tape when i was painting the grills on my flex 8

[Elward]

Look closely at the bottom..i think it looks sick.
Mine chipped because i didnt let it dry long enough..i repainted the bottom ninja w/ 2 white racing stripes on both sides on the bottom...looks sick now.

heres how it looked.

[claustrophobia]

use plastidip rubber coating spray, it sticks better to the lower part of the mask and is absolutly the best rubber/plastic paint around. will never chip (does peel if you try really hard.... use an exacto after you mask areas off)

she bends with no problems!

remeber guys, plastidip.... you saw it here first!

[master_jedi]

^ "you saw it here first" lol

OK the question...to paint the e-vents or not to paint the e-vents??? help me out here guys

[claustrophobia]

dont want someone else taking credit for my plastidip find.

[Cr4d13 0f D347h]

Originally Posted by master_jedi

^ "you saw it here first" lol

OK the question...to paint the e-vents or not to paint the e-vents??? help me out here guys

Dont! unless they are just black e-ventz

[master_jedi]

Originally Posted by Cr4d13 0f D347h

Dont! unless they are just black e-ventz

they r just black e-vents

[pballaholic]

where would you buy plastidip?
edit: nevermind

[Paintball=Fun]

i cant get my lenses or starp pm me if you can help me

[rivit]

This is all talk of flexes, just wondering. The Krylon will work great on profilers aswell?