so i received the flatness trigger for my mini and i wanted to know a quick install process. should i use the screws that came with the trigger or pull the old ones out? what about the magnets? the new trigger came with 3 small magnets, should i mount one of them in the back of the trigger and two up top? or do i need to use the old one on the top?
glue the magnets where they belong. make sure they are facing the correct way. copy the stock trigger for exsample. it is very fast to chance. when you punch the pin out, make sure you go the correct direction. it only goes on way, but i can't think off the top of my head. i belive it is online here somewhere.
due take care not to get extra glue on the trigger sides. the trigger is a nice tight fit and that can cuase a sticking problem
__________________ NO LONGER LIVING IN ENGLAND. ITEMS SHIPPED FROM SOUTH DAKOTA!!!
You knock out the stock pin from right to left! and watch the way it comes out because it needs to go back in that way.
__________________ '07 Ego
][nvert Mini Invert Paintball Boss Paintball
Originally posted by FatalKitty: edward norton rox my sox
Originally posted by Ninja 1058: the more you play with it, the more you know how it operates and such
Originally posted by pballin16: Not at all, and I just played with mine a few hours ago.
Your Privacy Choices