WGP Select-Fire Frame
Backround: The selectfire trigger frame is new updated version of the Worrframe that was launched for production in 2006/2007, but was first introduced on the 05 Superstock and Black Magic. It is basically the same trigger frame as the old Worrframe except with a different shape and the select fire capability. Selectfire means your are able to switch to different modes. The modes are:
- Semi Automatic (Cap. 20+)
- Full Automatic (Cap. 20+)
- Ramping Mode (Cap. 15)
- 3 Shot Burst (Cap. 20+)
Pros/Cons of purchasing a WGP Select-Fire Frame:
Pros:- Its speed capibilities (Mode's and "Cap's" listed above)
- It's comfort, the frame has a nice firm comforting grip to it.
- It's easy to understand operating system.
- It's Multi-colored LED's
- It's great milling design.
Cons: - It's price
- The fact you have to take off the "Jumper" to change modes.
- Low programmability
- No Timer
- No LCD screen
How it works:
Section A: The Eyes [OR] I.E.O
Your WGP Select-Fire Frame features Intelligent Eye Operation, I.E.O. It turns the eye "OFF" automatically if no paint in the breach is detected. The eye will remain in the "OFF" mode (allowing you to still fire) unless firing is stopped. When the continuous firing ceases, the eye will automatically restart to see if a paintball is present.
If during play your eye becomes dirty or stops working for some reason, your marker will automatically shut the eyes "OFF" and adjust the settings automatically so you will have less chance of "Ball Breakage".
Section B: The "Jumpers"
You will notice that your Select-Fire Frame only came with on black jump connector. Your E-Frame has four different modes as listed below.
- Semi Automatic- No Jumper is in place. (Cap. 20+)
- Full Automatic- Only the top jumper is in place. (Cap. 20+)
- Ramping Mode- Only the middle jumper is in place. (Cap. 15)
- 3 Shot Burst- Only the bottom jumper is in place. (Cap. 20+)
Section C: LED's
The flashing lights will indicate what mode you are in, and let you know whether the eye is "ON" or "OFF" and also if your in Demo mode.
There is a table frame the manual (Bottom of page) that will help you understand the LED's better.
Section D: Battery Levels
Your frame also features Intelligent Battery Monitioring. It has two features.
First: It will tell you your battery is low by blinking alternate Red/Yellow flashes.
Second: The marker will automatically power down after 30 minutes of inactivity.
Important Notes:
Note: Never Change a jumper when the battery is connected to the marker.
Note:
Note:
Note:
Note:
FAQ's
Question: When the marker is "ON" how do I shut my eye off?
Answer: Hold the button until a solid YELLOW light appears then immediately release, your eye is now "OFF", and the light will now flash RED
Question: How do I turn my eyes back "ON"?
Answer: Shut the marker "OFF", and turn it back "ON"
Question: How can you access the Demo mode?
Answer: Turn your marker on, hold the button untill you see a solid Yellow light then immediately release, now push the button once more and you are in demo mode.
Question: How do I exit Demo mode?
Answer: Shut the marker "OFF", and turn it back "ON"
Question: When I shoot my marker it will start slow at first and then get to going fast, is this normal.
Answer: Yes, Your eyes are just making sure that there is a ball in the breach and after a certain BPS hsa benn reach it stops. (4 or 5)
Question: My eyes seem to not be working what should I do?
Answer: Clean your eyes, and check your wires for any kinks, or fraid wires.
Question: My gun has major bounce, how do I deal with this?
Answer: Adjust your trigger and try to shortening the trigger pull.
Question: What tirggers will work on my SF Frame?
Answer: Eblade triggers will work on the SF frame. That gets you the Raguba (sp?) trigger at around $65 (+S&H from europe), and a lot of discontinued triggers (samuri, FBM, A+ Anno, etc.)
Question: Marker double firing or not recording trigger pulls?
Answer: Your trigger might be pushed to the side of the frame, recorrect its position.
Question: What boards will fit in my SF frame?
Answer: Your frame can hold the existing stock board and any of the eblade series type boards but it will have to milled for the LCD and Buttons. I would suggest getting your stock board "Flashed" by Predator.
Purchasing/Tech Help
Select-Fire Manual
ANSGear.com (Purchasing)
WGP.com (Purchasing/Tech Help)
PM ME!