[haniousman12]

As soon as I connect a fresh 9v to the board, it immediately chirps and the light goes solid blue. It does not do the 5 second dead battery chirping either. I have tested with my volt meter to make sure that the batteries are all putting out the 9v like they are suppose to. I am not able to enter into programming mode either.
Is the board shot? Did I screw something up?

[haniousman12]

Any ideas??

[p8baller18]

Have you only tried one 9v? If not, try another brand new one, regardless if the one you have now puts out 9v or not.

[haniousman12]

Tried that. It will do the low battery chirp every 5 seconds on a dead 9v, so something is still working.

[Command Center]

Use less voltage batteries.

[haniousman12]

Really? Where do you find less than 9v batteries, with the same mounting brackets?