Eigenring

Evil Rocky · 01-27-2011, 06:04 PM

Hoping I order mine this weekend....

systemxnme822 · 01-27-2011, 06:05 PM

i ordered mine last week. was hoping to have it already.

f-unit · 01-28-2011, 01:26 AM

same here, I ordered mine on the 20th...I definitely thought it would have came already

**Lurker27** · 01-28-2011, 02:11 AM

After talking to msonic, I got concerned about the spacer fitting between the top hat and sail - so I had my brother hand check them all, sorry about the delay everybody

systemxnme822 · 01-31-2011, 06:47 PM

any news on this?

Apollo918 · 01-31-2011, 10:59 PM

Quote:

Originally Posted by msonic

DM9 and newer are Not compatible.

FISCHER613 · 02-01-2011, 12:25 PM

will the eigenring work with Evolve bolts as well ? I have a DM4 with one installed.

Uziel Gal · 02-01-2011, 03:31 PM

Do you mean the full Evolve bolt kit? X-94? If so, then no, I don't believe it would be compatible. You haven't got a top hat in the normal sense for the Eigenring to fit on.

**Lurker27** · 02-01-2011, 03:37 PM

Can you get a picture/measurement? The spacer is a pretty precise fit over the threads...

FISCHER613 · 02-01-2011, 05:50 PM

Quote:

Originally Posted by Uziel Gal

Do you mean the full Evolve bolt kit? X-94? If so, then no, I don't believe it would be compatible. You haven't got a top hat in the normal sense for the Eigenring to fit on.

Your right just looked at both of them oh well.

I will still order this for the stock bolt though

systemxnme822 · 02-01-2011, 06:04 PM

whats the verdict lurker? when are they shipping and are we still getting ****ty first class shipping?

**Lurker27** · 02-01-2011, 07:24 PM

They've already shipped first class, which is like 1 day slower than priority

systemxnme822 · 02-02-2011, 08:16 AM

eigenring came in today, gonna go get it in a little bit and check it out.

**Lurker27** · 02-02-2011, 09:04 AM

Correct, all the installation you need to know is the picture on the website - unscrew the back cap, octagon goes on the threads, 3 orings and the ring slide onto the top hat.

systemxnme822 · 02-02-2011, 10:36 AM

im satisfied.

**Lurker27** · 02-02-2011, 11:01 AM

tniz · 02-02-2011, 09:42 PM

Quote:

Originally Posted by Lurker27

for the DM9? I would have to pick one up to get it to work.

If these Eigenrings perform as well as I think they could basically every matrix owner will want one

Then picking up a DM9 to play with won't be an issue

If you were able to get your hands on a DM10 for a little bit, would you be willing to maybe see if theres anyway to get one of these to work?

Got two feet of snow on the ground, and it's a little cold to be bringing a spoolie outside, so I'd be willing to help the cause.

excope · 02-03-2011, 01:40 PM

Got the three I ordered in today. Had a little problem, none of the stop rings would go onto the tophat in any of my Trixes, PM6, 06 Minion, or my DM7. Now they all fit onto a BW tophat fine but on the stock tophats they just would not go. In order to try these out I simply took a pair of scissors and clipped the stop ring in one of the flat areas, slips right on now and away we go.

Chronoing in the high 290's, low 300's and it's cold as balls here in the dirty south, will be interesting in the warmer months.

I have never heard a loud Matrix but this is just stupid quiet. Only problem I have now is that my DM7 is not loud enough for my Prophecy to feed constantly, guess I will just have to get the RF.

systemxnme822 · 02-03-2011, 01:53 PM

the stop rings arent supposed to go onto the tophat. its supposed to go in between that and the bolt cap. you screw the bolt cap on with the stop ring in between the 2 on the threads and it holds it there.

Apollo918 · 02-03-2011, 02:04 PM

it pinches on the threads between the tophat and the bolt cap

f-unit · 02-03-2011, 02:32 PM

stupid snow storm..I havent gotten mail in two days!!