[TheePsycho]

Elia Paintball milled Evil-Ehm. This marker took three years to build before it was finally finished and working.

[TheePsycho]

This was my Frankenstein CCM T2 that I sent out for anodizing to turn into this beautiful work of art.

CCM T2 with barrel and .679 sizer
86 Aluminum panels & Delrin panels
T2 top tube with sizers & barrel
CCM Prototype barrel cut down to 12"
Palmer cart reg
CCM Stock Class Feed Tube
CCM fittings
Slot blocker
Skeleton AT arm
Hitman Mod
CCM lever lock
Slick coated hammer, guide rod, sear and springs.

From this


To this

[TheePsycho]

Sterling

It is a one-of-one, built by hand, by CoolHand.

Body and pump are 6061 T-6, built from scratch. Uses 'cocker threaded barrels, AKA threaded feed tubes, and Angel threaded ball detents. Uses second gen Sterling lower tube hardware (hammer, sear, valve, etc), and a second gen Sterling bolt and pump arm. It is set up for a vertical bottle in front of the frame, and has a stainless steel hardline that runs from the VA to the valve body in the rear. It has a second gen Sterling aluminum frame, and comes with the CCM feed neck pictured. There is also a delrin sleeve that goes inside the pump handle to prevent the aluminum pump handle from marring the finish on your barrel.

I've added some parts and had some modifications done to it. I had another angel threaded detent on the other side, dual pump arms installed, the back of the bolt turned down to be used with an aluminum back block. The frame was t-slotted to use a P.E. OOPS ASA and I had a AKA threaded Cram & Jam adapter made. . I now have a 12gram cartridge changer. All that is left is for me to buy a reg to have when using HPA and purchase the ASA, well and anodizing.










Current pictures of modifications.



CCM Cram & Jam AKA threaded adapter.

[TheePsycho]

Merlin



Inception Designs Autococker

Another one I'm working on.

[TheePsycho]

03' Viking

Just purchased this marker and shipped it off to Jared at DC for some work and parts and then off to another machinist for the rest of the cosmetic work.

The ION reg was taken off immediately upon receiving it. The CCM feedneck was trashed when I got it so that has to go as well. Now for the good on this Viking. The Viking came with a RT Valve, Tadao Ebisu board, 03' Viking tool kit, WAS board, Nelson Board, BobLong Long shot barrel. I sold off the ION reg, barrel and WAS board and I traded off the 45 frame for a Tarantula 90 degree frame.



Updated pictures.

[Methodcaptain]

I really like that Evil-M. Nicely done.

I love that Sterling!

[Hogzilla88]

that merlin looks great so far. Although I hated my frenzy frame when I had a valhalla.

[Octagonalized]

Beatiful guns.

[PaulE2Cocker]

I'm so jealous ur the one that bought that pump from cool hand wanted so bad u did good work finishing what color might I ask u doin it t2 came back gorgeous who did u have anodize?

[TheePsycho]

Originally Posted by Methodcaptain

I really like that Evil-M. Nicely done.

I love that Sterling!

Thank you they took some time to get them the way I wanted them.

Originally Posted by Hogzilla88

that merlin looks great so far. Although I hated my frenzy frame when I had a valhalla.

I thought the Frenzy frame would be the best frame I could get without heavy modification for the Merlin. The only thing left is custom eye covers.

Originally Posted by Octagonalized

Beatiful guns.

Thank you.

Originally Posted by PaulE2Cocker

I'm so jealous ur the one that bought that pump from cool hand wanted so bad u did good work finishing what color might I ask u doin it t2 came back gorgeous who did u have anodize?

Yeah it's a very nice Sterling, I though I needed to add my own personal modifications to make it my own gun. I hope CoolHand doesn't mind to much. I will be doing the Sterling in a Jurassic Goo with the back slots in black. The T2 was anodized by Ano-Tech Metal Finishing.

[Octagonalized]

No problem you deserve it.

[noltnermd03]

You have some really cool pieces of paintball history.

in the first picture what is the purpose of the fill nipple on the macroline port of the evil m's hpr?

[FirePro84]

The quality of work put in these markers is evident in the photos...there is definitely some beautiful work here.

I love seeing stuff like this and knowing that truly custom paintball markers and modifications aren't dead yet...keep up the great work man!

[TheHef]

very nice

[TheePsycho]

Originally Posted by noltnermd03

You have some really cool pieces of paintball history.

in the first picture what is the purpose of the fill nipple on the macroline port of the evil m's hpr?

Thank you and the fill nipple was just on there for when Jared from DC was testing and tuning the gun.

Originally Posted by FirePro84

The quality of work put in these markers is evident in the photos...there is definitely some beautiful work here.

I love seeing stuff like this and knowing that truly custom paintball markers and modifications aren't dead yet...keep up the great work man!

Thank you for the kind words. Custom isn't dead yet, it's just really expensive and time consuming.

Originally Posted by TheHef

very nice

Thank you.

[ooop18]

i like that T2

[TheePsycho]

Originally Posted by ooop18

i like that T2

Thanks, I added more pictures of the T2.

[NkdMangina]

lovin' the pumps

[DB-1071]

Now I want to play pump if I get to use this beauty!!

Originally Posted by TheePsycho

Sterling

It is a one-of-one, built by hand, by CoolHand.

Body and pump are 6061 T-6, built from scratch. Uses 'cocker threaded barrels, AKA threaded feed tubes, and Angel threaded ball detents. Uses second gen Sterling lower tube hardware (hammer, sear, valve, etc), and a second gen Sterling bolt and pump arm. It is set up for a vertical bottle in front of the frame, and has a stainless steel hardline that runs from the VA to the valve body in the rear. It has a second gen Sterling aluminum frame, and comes with the CCM feed neck pictured. There is also a delrin sleeve that goes inside the pump handle to prevent the aluminum pump handle from marring the finish on your barrel.

I've added some parts and had some modifications done to it. I had another angel threaded detent on the other side, dual pump arms installed, the back of the bolt turned down to be used with an aluminum back block. The frame was t-slotted to use a P.E. OOPS ASA and I had a AKA threaded Cram & Jam adapter made. . I now have a 12gram cartridge changer. All that is left is for me to buy a reg to have when using HPA and purchase the ASA, well and anodizing.










Current pictures of modifications.



CCM Cram & Jam AKA threaded adapter.

[Vegard]

That ehm makes me regret selling my bodykit

[Cracker_35]

You should really post a warning so we aren't blindsided by the beauty.