Quote:
Originally Posted by b18flip
i was having the same problem....till i finally tried replacing the very last o-ring in the chamber. problem solved. good luck!
|
thanks for this. I found a pick at the bottom of my paintball extra tub thing and I replaced the oring. the stock one wasn't sealing like it should have been but it works now.
one question though. when i turn the regulator all the way clockwise (IN, which should reduce the pressure right; it's what the manual says) but the bolt works perfectly with no pressure. how is that. when I turn the regulator counterclockwise (OUT) a ways it starts to leak. Could it be that my regulator has to be turned the opposite direction for the pressure to be regulated.