[LiquidFireAK]

Im recieving my geo 2 in a few days. is there anything I need to do before airing it up and shooting it?

Ive owned timmys all my life and with timmys i have to adjust the front LPR below 100psi so i dont blow the noid etc.. Is there anything I need to do with geo2's to set up before shooting it? or its good right out of the box?

[Uziel Gal]

I personally like to clean and regrease a new marker when I get it - bolt kit and reg - just in case it has been sat around gathering dust for a while. Shouldn't really be necessary, but it only takes a few minutes and does no harm. Other than that, you should be able to use it straight away - no special precautions or adjustments should be necessary. The reg should have been set prior to packaging.

[megabuck 14]

Eclispe guns are legendary for being ready as soon as u open the box, so there shouldn't b any problems. but it is a good idea to clean and re-lube it, because sometimes there are small metal shavings let around the small crevises from being milled.

[xluben]

Turn it on and play!

[Nicky T]

Originally Posted by megabuck 14

Eclispe guns are legendary for being ready as soon as u open the box, so there shouldn't b any problems. but it is a good idea to clean and re-lube it, because sometimes there are small metal shavings let around the small crevises from being milled.

I think that your statement above is a little contradicatory.....

Any "small metal shavings" from milling are taken care of during the QC check before blasting, after blasting, before anodising, after anodising, before assembly, during assembly, after assembly, after test and before packing

[NuNu@BR]

The only really important thing you want to make sure you do before you add paint and air to it is ......make sure you wear a pamper or some depends because your gonna wet yourself in awe of it's greatness!


Congrats and welcome to the PE family,see now you know why the company's initials also resemble a body function!

[livewire420]

Originally Posted by LiquidFireAK

Im recieving my geo 2 in a few days. is there anything I need to do before airing it up and shooting it?

Ive owned timmys all my life and with timmys i have to adjust the front LPR below 100psi so i dont blow the noid etc.. Is there anything I need to do with geo2's to set up before shooting it? or its good right out of the box?

All you need to do is show her love and she will mow muppets for you.
p.s. Try sleeping with it at night. once she bonds with you, she will never let you down......................... P.E. FOR LIFE.......................

[Trip XIII]

Originally Posted by Nicky T

I think that your statement above is a little contradicatory.....

Any "small metal shavings" from milling are taken care of during the QC check before blasting, after blasting, before anodising, after anodising, before assembly, during assembly, after assembly, after test and before packing

I think the small metal shavings are taking care of with the QC check.

[megabuck 14]

Originally Posted by Nicky T

I think that your statement above is a little contradicatory.....

Any "small metal shavings" from milling are taken care of during the QC check before blasting, after blasting, before anodising, after anodising, before assembly, during assembly, after assembly, after test and before packing

oh! ok kool! Thanks for clearing that up for me, my bad.