[luap]

I'll be teaching you how you can order 100 of each oring for the timmy and only be spending a measly 20 dollars. I put this together real fast.

First goto www.mcmaster.com



Then goto the search bar and type in o-ring and press enter




Then see where it says Type and then oring with this picture? click it




Then click the round oring




Then find the bar that says AS568A Dash Number. Drop it down to the size of the oring you want.




Then click Buna-N. And to get the 006 teflon orings just click on PTFE instead of buna n




Then click Standard.




Then to the left hand side put how many bags you want, there are 100 orings in each bag. Then you click add to order.




Viola. These are all the orings i need to rebuild my timmy like 100 times . Only for 18.29 plus a couple bux for shipping.


NO more need to get ripped off to only rebuild you timmy 2 or 3 times.

BTW make sure that the Durometer(Hardness) is Shore A: 70
You can also buy X rings for a double seal but they are a little more. Have fun.

To get the teflon 006 orings just click on PTFE instead of Buna N

Also these kinds of orings work for all other markers too, just get the size of the orings an have at it.






2k2 oring sizes straight from the manual ... dunno what the 2k4 sizes are

Bolt (3) .......015

Poppet (1) ....004

Ram Front (1) ...006

Ram Rear (1)......011

Pressurized Sleeve (2).......015

Sleeve End Cap (1) ....011

Cup Seal (1)......... order from Delta


Regulator Assembly

HPR Housing (1)..016

HPR Piston (1) ........113

HPR Pin Valve Base (1) ......010

HPR Pin Valve (1).......... 006 Teflon

LPR Housing (1)......016

LPR Piston (1) .....113

LPR Pin Valve Base (1) ..010

LPR Pin Valve (1) ........... 006 Teflon

Regulator Base (2).......015

[rcjustin]

nice. thnx

[antboi]

stickie..!!

[paintballer467]

Holy **** good find!!! I am so gonna get x rings!!!

Edit: what do you think about the square ones?

Edit#2: if you buy this and sell kits with 2 o rings each for 20 dollars, you could make $980!!

[Blackout757]

wow good find

[SilverLCDBushy]

Good find for slow people.





McMaster is great.

[PeaTear_Griffin]

nice find, i'm going to buy the x-rings my kit was missing

[paintballer467]

So does anyone want to put a list of x rings up for me since I lack the Knowledge?

[EmpirePaintball]

you sir are now my friend.

very nice, STICKY

[PeaTear_Griffin]

compare the x-ring ID and OD with the ID and OD of the normal o-rings, I am pretty sure the numbers are the same check to make sure.

[EmpirePaintball]

i wonder how many people are gona buy anough to rebuild a whole timmy and only spend like 20 for 100 kits and sell them for 10 or so a kit

[luap]

haha im going up to my field and selling them...i might even sell them to the proshop hehe..profit profit profit...

[Not a former member]

screw that ... my brother works at mazak and gets them for free... *****es

[BlackLabel767]

anyone know the AS568A dash number for the alias lpr orings?

[luap]

Originally posted by Not a former member
screw that ... my brother works at mazak and gets them for free... *****es

alot of us dont have that advantage haha

[The X Factor]

How do I find out which O-Rings I need to order. I just bought a new 2k4 Empire Timmy, should I just buy the ones you have listed?

[Guttsdozer]

Nice! Thanks

[luap]

if you need to know the size look in the manual...dont have a manual you say?


http://boblong.com/newsite/downloads...atormanual.pdf

the sizes are near the end

[rcjustin]

xring are MUCH more expensiv.e. 5 times more actally.

[The X Factor]

Whats a X-Ring...I dont see it on that site?

[The X Factor]

double seal?