Help bring Hall fx Kits are back

darkspidie8419 · 02-01-2009, 09:56 PM

**This is not a BST, This is merely to gauge interest in the product and direct people to a place where they can find more info and potentially pick one up.**
I want to start by saying I am in no way affiliated with X-customs. I am simply a fan of this small companies work. I saw many others were interested in obtaining this product just as I am.
Ok many of you who were around remember hearing, seeing, or using the Hall Fx kit made by XyXyll. If you don't remember or you were not around then it was one of the best drop in upgrades ever invented for a spyder that increased the firing rate that most players could extract from thier gun without ever worrying about trigger bounce. Heres a link to the design and function of the Hall Fx kit. https://www.pbnation.com/showthread.php?t=2291630

XyXyll told me that if we get enough people together he will make a batch of them and sell the kits again for great price.

Post up and I will add your names to the list. After a little while I'll firm up with those interested whether they are still wanting kits or not. I'll start. Again this is not a BST thread, This is merely to gauge interest in the product and direct people to a place where they can find more info and potentially pick one up.

1. Darkspidie8419 2
2. Excope 1
3. Diablo8264 1
4. PsychoZulu 1
5. VagabondStarJXF (spyder.tv) 3
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.

excope · 02-01-2009, 10:11 PM

I am sure he has took the pics down from their host but the picks in the link don't come up for me. Not a big deal though. Put me down for one for now.

*edit* sending you a pm about this as well just in case the Mods decide this is "too BSTish".

Xyxyll · 02-01-2009, 10:58 PM

Firstly, I must emphasize that X-Customs is no more, and no products will ever be readily available again. I'm willing to make these ESP Hall FX kits for darkspidie8419 because I finally have some free time. I cannot make any more kits with the parts on hand, however, so I must place a few orders with my former suppliers. Each supplier has its own minimum purchase, so I'm looking at more kits than I need.

Here's the deal. In order to get darkspidie8419 his Hall FX kits and lessen my burden, we discussed putting together a group buy. I will make as many kits as are desired and will pass them along at a sliding price scale. The more kits spoken for, the cheaper I'll let them go for (for everyone).

I don't want darkspidie8419 to be in any trouble for this thread, as the way it has been presented may be confused as a BST thread. Therefore, I ask that anyone interested be patient, while I set up a separate website to explain the details a bit more thoroughly.

Thanks guys. I am grateful for your continued support and appreciation for my work even months after it was discontinued.

‹GOD› · 02-01-2009, 11:16 PM

Very cool idea. I've seen a few guys coming in here asking where they can find one, now we have an answer.

diablo8264 · 02-02-2009, 12:58 PM

id pick 1 up

PsychoZulu · 02-02-2009, 11:19 PM

can we get some working pics of the mod?

ferret15 · 02-02-2009, 11:25 PM

lol what a noob

PsychoZulu · 02-02-2009, 11:33 PM

are you calling me a noob for asking for pictures of the magnent switch?

ferret15 · 02-02-2009, 11:51 PM

yep because if you think hard omegra's 2008 spyder of the year uses this very setup

Xyxyll · 02-02-2009, 11:52 PM

Quote:

Originally Posted by PsychoZulu

can we get some working pics of the mod?

http://www.pbreview.com/products/reviews/5329/
https://www.pbnation.com/reviews/manu...112/x-customs/

Despite PBReview displaying "No Photo Available" (PBReview just hasn't been the same since it was sold), there are two pictures available in the "View Photos" link.

ferret15 · 02-03-2009, 12:02 AM

now if only there was a VS series switch

PsychoZulu · 02-03-2009, 12:05 AM

i'd say put me down for one, but i have a virtue board...tear.

also im still not seeing any pics. maybe my browser isnt loading them...

ferret15 · 02-03-2009, 12:06 AM

wtf? sounds like excuses to me. what does a virtue board have to do with a microswitch?

Xyxyll · 02-03-2009, 12:09 AM

Quote:

Originally Posted by Xyxyll

Compatibility

The X-Customs Hall FX Kits are 100% compatible with all stock ESP-framed Spyders (Classic, IPI, CAMD, LED, and LCD boards), T-Boards, IS Boards, and XSF Boards. Compatibility with the Kingman Tadao, Virtue, and Lucky Spitfire Boards is not yet available but is in process.

PM me and we may be able to come up with a custom solution for your Virtue board (or Tadao/Lucky for anyone else).

excope · 02-03-2009, 12:11 AM

Why would this not work with a Virtue Board?

PsychoZulu · 02-03-2009, 12:34 AM

Quote:

Originally Posted by ferret15

yep because if you think hard omegra's 2008 spyder of the year uses this very setup

do you remember if omegara had a pic of the magnent mod in his thread

Quote:

Originally Posted by Xyxyll

PM me and we may be able to come up with a custom solution for your Virtue board (or Tadao/Lucky for anyone else).

are you going to offer the NV trigger again?

Xyxyll · 02-03-2009, 01:03 AM

Quote:

Originally Posted by excope

Why would this not work with a Virtue Board?

The Tadao, Virtue, and Lucky boards all lack the on/off switch used in the ESP boards, T-Boards, etc. The Hall FX kit utilizes this on/off switch to power the Hall FX sensor on and off. It's possible we can get the Hall FX kit working on a Tadao/Virtue/Lucky board by rewiring the original on/off switch.

Quote:

Originally Posted by PsychoZulu

do you remember if omegara had a pic of the magnent mod in his thread

are you going to offer the NV trigger again?

http://s224.photobucket.com/albums/d...ara/Paintball/

Here's a stock photo of the old NV/FX bundle. http://i483.photobucket.com/albums/r...roductpics.jpg

No, I will not be offering the NV trigger any more. I have one or two left over, but I'm going to offer it/them first to those that have already asked about them over the past few months.

excope · 02-03-2009, 02:19 AM

Quote:

Originally Posted by Xyxyll

The Tadao, Virtue, and Lucky boards all lack the on/off switch used in the ESP boards, T-Boards, etc. The Hall FX kit utilizes this on/off switch to power the Hall FX sensor on and off. It's possible we can get the Hall FX kit working on a Tadao/Virtue/Lucky board by rewiring the original on/off switch.

After I ask that is what I figured. That shouldn't be to hard to do.

darkspidie8419 · 02-03-2009, 08:22 AM

Quote:

Originally Posted by ferret15

lol what a noob

Are you not having a good day ferret? What does this kind of rudeness teach newer players or forum members about paintball? Be a better representative to your sport.

Back on topic*

Rewiring the membrane pad with the hall fx switch is easy. I built a homemade intellifeed for my mag that I linked to my revy on off switch.

PsychoZulu · 02-03-2009, 12:22 PM

Quote:

Originally Posted by darkspidie8419

Are you not having a good day ferret? What does this kind of rudeness teach newer players or forum members about paintball? Be a better representative to your sport.

Back on topic*

Rewiring the membrane pad with the hall fx switch is easy. I built a homemade intellifeed for my mag that I linked to my revy on off switch.

wait a minute... so you have a regular continuious feed hopper that you linked to your trigger so every time your pull the trigger it turns your hopper on for a second?!?!?! thats brilliant!!! thats like what they did with the pulse loader isnt it?

ferret15 · 02-03-2009, 12:29 PM

https://www.pbnation.com/showthread.php?t=2871466

here is a VW mod.