Quote:
Originally Posted by Wekillsuckers1234
I want to order the whole bolt system off the nt11 but not sure if the bolt will fit if they changed the sizing of the bolt
|
If you want to only change the bolt you have to buy the can too. The nt11 can has a smaller ID and the bolt has a smaller OD. They will both work with the old plunger/spool/spacer rod.
If you want to buy the whole engine that will also fit in the nt10. Just take your back cap off the old spacer rod and onto the new one...done. You cannot use an nt11 back cap on an nt10 or vice versa.