[Chrismeisterpmc]

My relay on/off isn't degassing whenever I pull the lever out, do I need to oil it?

[JoshC90]

Originally Posted by Chrismeisterpmc

My relay on/off isn't degassing whenever I pull the lever out, do I need to oil it?

That could help, just drip 1 or 2 drops down the asa hole and put ure tank on cycle it a few dry shots and try releasing it.

[Starks]

That should do the trick. Just make sure it's specifically marker oil and no more than 2 drops in the ASA.

[Teddy picker99]

How much paint have u put through it? Mine took bout 10 cases before it would degass. X

[Chrismeisterpmc]

Alright I'll try it out guys thanks

[Chrismeisterpmc]

Originally Posted by Teddy picker99

How much paint have u put through it? Mine took bout 10 cases before it would degass. X

I've put well over 10 cases in it haha

[BBHustla]

Happens to me at times.. I just dry fire at the end of the day to let it all out.

[stratmastertj]

this happened to me, along with regulator creep. I was able to get a new relay asa through warranty.

[Chrismeisterpmc]

Originally Posted by stratmastertj

this happened to me, along with regulator creep. I was able to get a new relay asa through warranty.

How long does the warranty last? I bought mine about a year ago

[stratmastertj]

You should still be able to get one. I was just shipped a new bolt guide under warranty and I've had my axe almost a year.

[Arvic Ong]

If any of the suggestions didn't work, try contacting empire and ask if they will replace it for you. I am sure they'll replace it for you for free. They have really great customer service!

[fishleg]

Check the lever pin is tight mine was very loose must allow the lever to not sit straight. I tightened mine works fine now

[SNAKESNIPER (Banned)]

a small drop of marker oil onto the reg pin should stop this problem. One drop of oil, tank on, gas up, fire a bunch of shots.