Switch Mod

UnbrakableX · 02-26-2005, 08:17 AM

Sorry to post this but it's my last resort. I searched and couldn't find the guide on how to mod your stock switch and Bodger's switch guide link was dead so I never found it. Can someone give me a link to how to mod your stock dragun switch to make it a 50/25 gram?

GooG · 02-26-2005, 08:30 AM

id reccomend buying a new one, but ill try to find the link

GooG · 02-26-2005, 08:40 AM

You open the switch and there is a small metal thing that when the switch is pushed it makes contact.You bend that so it is closer to the contact.Then on the piece where the springs is attached you bend it forward a little bit it will lighten the spring and that is all you do try to find some pics if the thread is delted try googling it.But you should look at the pics it will help you understand what you are doing.

tombstone wrote that

UnbrakableX · 02-26-2005, 09:10 AM

Ok thanks goog.

UnbrakableX · 02-26-2005, 10:05 AM

http://photobucket.com/albums/v217/U...t=49fbe4ff.jpg

http://photobucket.com/albums/v217/U...t=7654dc6b.jpg

http://photobucket.com/albums/v217/U...t=f54f5f3d.jpg

http://photobucket.com/albums/v217/U...t=8c603686.jpg

http://photobucket.com/albums/v217/U...t=41b2f8cd.jpg

My new problem is that I cant get my drop forward on. The screws I have arent long enough and when I use long screws the board is in the way. What can I do?? I love draguns guns but their design on some things is horrible.

shocktroop · 02-26-2005, 10:18 AM

damn your drop is long! lol
You tried using the stock screws? worked for me wen i used them on a drop i got

GooG · 02-26-2005, 10:31 AM

buy some differnt size 10/32 screws, by size i meant length

UnbrakableX · 02-26-2005, 10:35 AM

I didnt get stock screws, and I hate not having a huge drop. I tried using just an asa and I hate it. Ill try finding some really long screws.

UnbrakableX · 02-26-2005, 08:32 PM

Ok once again I have a problem. When i go to click the noid, (turn on gun and pull trigger with no air) all it does is make a click noise in the 3 way. what is with this? Sometimes when i stand the gun upright (instead of laying it down, it does it right.) I tried 4 different 9 volts and it still was messed up. Basically it clicks in the electro 3 way but not in the noid. what is with this? Help please.

Master_Flea · 02-26-2005, 08:44 PM

are you saying only the 3way opperates and not the noid. ok tell me what you did toit differently

UnbrakableX · 02-27-2005, 07:02 AM

The 3 way shouldnt operate when I only have a battery connected and no air. All i did was move some of the wires around. BUT, on the board it looks as if the plug that goes to the switch is lifted up kinda and wont go back down. I have another board but dont know how to switch them really. Basically, the 3 way clicks, the noid doesnt click when there is no air attached and just a battery on with bps to 20 and dwell to 6. I have never put air on it.

half-step · 02-27-2005, 10:42 AM

http://www.kingman.com/ubbthreads/sh...b=5&o=&fpart=1