[jexinko]

hi,
I've got a tadao in my etek and i'm experiencing troubles with that board. When ramping is activated and just after releasing the trigger it shoots 2 or 3 more balls. My gun was refused at my last competition and i don't know how to solve that problem.
If you have any idea please let me know.
thx

[bigfatdanman]

up your debounce.

[jexinko]

i guess it has nothing to do with bounce because i can have bonus ball keeping my trigger pushed, it's like ramping continue instead of stopping. Anyway i put my debounce at 20 and it did not change anything...

[Blackrain7557]

check what ramping you are on, it may be possible you have some kind of goofy ramping setup

[vdubdriver]

You probably have a 3 shot ramp on.

[jexinko]

i actually have 100% ramp on.

[Blackrain7557]

use PSP ramping for it, capped at 15, that should fix it

[jexinko]

only millenium is allowed in france, ramp should start at 7,5 bps...

[vikeor]

play with the trigger, my friend had that problem at the Centurio Event in Athens, turned out it was normal trigger bounce...

[DiE$el NYW CreW]

Well check if your trigger setup my be to close , if you have spring give it more resistant , and make sure your the board has the right setup specialy your ramp start.

[a guy]

and if all else fails just join the elite and pump out 12-19bps in semi

[justavillain]

are you using 100% ramp or PSP/Millennium 100% ramp?

[stips]

Raise you CPF to 100% and see if that helps.