[nin7474]

Originally Posted by adamnewff

i put mine to what i think is 65 lpr and 185 hpr and it shoots between 290-300 very consistantly with decent feild paint. having around 10 cases thru.

if i got any lower on the lpr my gun wont cycle, but i find it great at 65. really really quite and smooth

awesome, thanks

[desakto]

Originally Posted by adamnewff

i put mine to what i think is 65 lpr and 185 hpr and it shoots between 290-300 very consistantly with decent feild paint. having around 10 cases thru.

if i got any lower on the lpr my gun wont cycle, but i find it great at 65. really really quite and smooth

Whay did you use on the dwell?

[adamnewff]

Originally Posted by desakto

Whay did you use on the dwell?

whatever stock is, never changed the dwell

ive been shooting 15bps 3 shot psp and there is no drop off or in efficiency, geting about 15 pods and a hopper of of a 4000 fill, using a 684500

[Alter E G O]

Originally Posted by nin7474

This you try his fix in the video?
http://www.youtube.com/watch?v=UXB_xz0H8O0

TY

[nin7474]

Originally Posted by Alter E G O

TY

NP! Did that fix your problem?

[adamnewff]

if your gonna replace the asa oring, replace it with a clear urethane one. its a ***** to get on but it will never rip and you will never have problems with that again

[nin7474]

Originally Posted by adamnewff

if your gonna replace the asa oring, replace it with a clear urethane one. its a ***** to get on but it will never rip and you will never have problems with that again

What's the exact size and where can I find them?

[adamnewff]

i dont know to tell you the truth..our proshop has buckets full , the owner recommended it. id imagine they are 004, they are on pistons of myth regs if you have a old one you can take apart.. you can buy them in pure energy repair kits.

ive had it in my asa for months and never have a problem... but had to change my black oring 3 times in a week before i swaped

its very very hard to get on but it will go on forsure

[nin7474]

Originally Posted by adamnewff

i dont know to tell you the truth..our proshop has buckets full , the owner recommended it. id imagine they are 004, they are on pistons of myth regs if you have a old one you can take apart.. you can buy them in pure energy repair kits.

ive had it in my asa for months and never have a problem... but had to change my black oring 3 times in a week before i swaped

its very very hard to get on but it will go on forsure

Thanks. Did your Black orings blow or got cut?

[seanhockey13 (Banned)]

hey guys i got my g6r today and my friend was tweeking it and got it to shoot just pure TITS no kick at all.......but.......the lpr was at like 60 and hpr was at like 280 - 290 LOL so i then took the gun and set it LPR at 70 and HPR at 140 btw gun has LP poppit and dwell is stock. also i use SLP reg.

so my question is does what i have it set at now good and how bad is it if the HPR is above 250? also i need it to crono at 285

[nin7474]

Originally Posted by seanhockey13

hey guys i got my g6r today and my friend was tweeking it and got it to shoot just pure TITS no kick at all.......but.......the lpr was at like 60 and hpr was at like 280 - 290 LOL so i then took the gun and set it LPR at 70 and HPR at 140 btw gun has LP poppit and dwell is stock. also i use SLP reg.

so my question is does what i have it set at now good and how bad is it if the HPR is above 250? also i need it to crono at 285

Cool!! Can't wait to get mine!
Got a hand held chrono and Reballs ready to Tweak it.

[seanhockey13 (Banned)]

so any ideas guys?

[specopsdeath2]

i can chrono my G6R at 290ish at around 70 lpr (its a bit lower but not too much) and HPR at 185ish...i feel like the HPR is a bit too high

[seanhockey13 (Banned)]

well im able to lower mine to 140

[enviousjohn]

There was an installation video floating around somewhere, anyone have a link to it?

[nin7474]

Originally Posted by enviousjohn

There was an installation video floating around somewhere, anyone have a link to it?

Of installing the LP POPPET?
just do a search on YouTube. Plenty of dissemble/reassemble vids of the G6R

[gamer565]

Originally Posted by enviousjohn

There was an installation video floating around somewhere, anyone have a link to it?

Ther really should be no need for a video on how to remove 3 screws and a poppet...

[enviousjohn]

-

[gamer565]

Manual does cover it all, so as long as he can read then he is set...

Edit:

Just for the record there is a video, its on youtube.

[nin7474]

I for one like to be fully comfortable working on my markers and enjoy watching the videos. It's easier for maintenance and can learn little tricks to make it easier.
I've seen 3 videos on YouTube of G6R's taken apart and reassembled BEFORE I've gotten it. Granted it the same subject but still interesting to me. Guess I got it from working on my Mags.
I'll post links later here for all that's interested.

[specopsdeath2]

Originally Posted by enviousjohn

There really should be no need for being a ****ing cock.

I've got a friend who is unfamiliar with both the G6R platform and Intimidators at large who wanted a little help with the disassembly his first time around. I am not with said friend and after trying to talk him through it on the phone (he doesn't speak English as a first language), I was having a hard time giving him the guidance he desired.

Yes, he probably can and will figure it out on his own eventually, but it's his $900 investment and one he really doesn't want to **** up... you know, yanking when he isn't supposed to, pinching a wire he didn't think to look for, and hey, just some basic reassurance and guidance his first time disassembling the marker. A video would help him out immensely. Again, he doesn't speak English as a first language so while you or I could infer how to do it based on some basic disassembly videos, one made explicitly showing how the poppet is removed/installed would be a big help to him.

Get it, dick?

theres no need to be a prick about this. did you bother to even LOOK for the video before lashing out at someone else? didnt think so. search first, do the work yourself. if you cant find it, come and ask here. simple