[EvilFrontman3]

(I've deleted the unneeded posts from this thread, so the remaining posts may appear odd. bear with me)

Smart Parts Shocker SFT stock bolt:

-This is the bolt that comes stock in the SFTs from year 2003-2006.
-The bolt has horrible effiency.

Smart Parts Shocker SFT stock bolt Identification:

-It has small, circular holes on the bolt.
-The bolt can easily be removed from the can (slides out).
-The fire chamber is one-piece, it doesn't come apart.
-Anodized different shades of gray/green/blue, or clear-coat silver.

Smart Parts Shocker Turbocharger (HE) bolt:

-It is an upgrade for the SFTs, and it comes stock in the new NXTs.
-It greatly increase effiency in your Shocker.

Smart Parts Shocker Turbocharger (HE) bolt Identification:

-It has elongated, ovular holes on the bolt.
-The bolt has to have an o-ring removed to be taken out the can.
-The front/cap of the fire chamber can be removed for disassembly.
-Anodized different shades of gray/green/blue, or clear-coat silver.

NDZ Stinger v1.

The bolt is delrin, the fire chamber looks like the one above. If you have one of these don't bother using it, it probably won't work. Send it to NDZ and they'll mail you a free v3.

NDZ Stringer v2.

The bolt is the same as the v1 (above) except it's made from aluminum. The fire chamber for the v2 looks similar to the current "v3" fire chamber with the side o-rings, except it doesn't seal agains the front of the bolt like the HE (notice there's no front o-ring groove on this bolt). diagram (notice the shape of the fire chamber)
Mail this into NDZ along with $20 and they'll send you a v3.

Freeflow v1

The bolt pictured has a lot of ano wear and probably leaks (common for freeflow bolts). The v1 has 5 ports in the bolt face. The Freeflow fire chambers look similar to the stock fire chamber except it unscrews (seen below)

Freelfow v3

The bolts are virtually the same except the bolt's seal ring was reversed. Freeflow v2/v3 bolts have 8 ports in the face.

Evolve ULP

Note the gold magnesium bolt and the fire chamber that resembles the NDZ v3.

Evolve v1/v2

These fit in the special Evolve fire chambers.

NoX NV bolt version-1

Made form white ertalyte

NoX NV bolt version-1.5

Made form black ertalyte

===========================

StrangBalla55 Shocker stock bolt mod:



-Sayed to have effiency like the Smarts Parts HE bolt.
-You need a Dremel and patience to do this mod.

I hope this chart will help people who have a Shocker, and they are uncertain about the bolt. -OR- I hope this chart will help people who have just received a Shocker in a trade, and they are uncertain about the bolt.

-EvilFrontman3
-Edited and arranged by Ydna

[Rodrigo - PTG]

could be possible that if you make some milling in the stock bolt, it works as a HE??? or im just dreaming xD

[EvilFrontman3]

I need pics of these bolts:
-NDZ V3 Stinger (Jonezed7 is getting me this)
-Evolve ULP
-Evolve v1
-Evolve v2

[StrangeBalla55]

Originally Posted by K-9

Nice one Strange, way to burst his bubble.
Strange, what are the effientcy numbers you get off your hagard bolt?

before i fixed my NDZ bolt( thats right, i said fix) I was getting around 3pods or so and a hopper with my 45/45. With the NDZ i get about 4 and half+hopper off same size tank.

never really tested however.

[RORplayer44]

The turbocharger can be the greenish color, right?

[EvilFrontman3]

Are you talking about the color that is similar to the stock bolt (in pics)? If so, then yes. I have a greenish-brownish HE in my Shocker as of now.
Nic

[Ydna]

uggh...you REALLLY want to make an all inclusive "all bolts" version thread?

gimme a few minutes....

edit: DON'T EDIT THE FIRST POST / I'M EDITING IT AS I TYPE THIS OMGOMGOMGOMG I'LL KILL YOU

edit2: done

[Ydna]

Originally Posted by Rodrigo - PTG

there is some diference between the NDZ V2 and V3 cans??? cos i could get a v2 but i dont know if it will make some REALLY diference with my stock bolt.

The v2 works just like the stock bolt, except with the LP fire chamber that NDZ makes for it. NDZ then redesigned it into the "v3" which works like the HE bolt.

If you can get a v2 cheap then you should go for it, because you can trade it in for a v3 along with $20.

[Ydna]

Originally Posted by sheWILLchoke

Do the NDZ stinger's work on NXT's?

Only if the fire chamber is the "closed" variety, without the side o-rings.

[Ydna]

Okay I added it to the ult sticky thread, I don't want to stick this but it's in the thread either way. Please direct people with identification questions to this thread (they seem to appear every week or so).

IO'll probably go through and clean the thread up a bit, laters....

[Ydna]

Originally Posted by Rodrigo - PTG

Thanks but i was talking about just the V2 Can, not the bolt, or the kit, just the can, is better than my stock can?? and if it could work with any new bolt ??

It'll perform just like installing one of the v3 fire chambers without the rest of the kit. There will probably be a drop in pressure but the overall performance will be pretty much unchanged.

[KarNivOr073]

hey guys will the V3 NDZ HE kit do much, or should i just go with the smart parts turbo charger bolt

[e_friccero]

very helpful just found out that i was lied to in a trade about my bolt thanx

[lamar]

thanks for the info I was not sure about the cosmetic differances of the bolts and cans

[jbob8314]

i have a 05 sft do they come with a he can if so where can i geta he bolt seperate

[K-9]

You need to purchase an HE bolt kit.
punisherspb.com

[jsnole]

I have a Freeflow V1 bolt. Just bought it and it came with a stock can. Will it be any better that stock with the stock can? I want to know from someone that would be able to tell me cause i dont know. I thought it was a Smart Parts HE bolt and can, but i was decieved. lol Please let me know... Thanks!

[paintballordie08]

alright i have a bolt that looks exactly like a stock SFT bolt, but it is made out of delrin (actually i dont think its delrin, but it is some sort of plastic) its white, and it has one less o-ring than the stock bolt, but it has the exact same porting on the sides and the face of the bolt is identical as well... it is not pictured above, any one got any ideas?

[Ydna]

That sounds like a delrin stock bolt.

About the Freeflow bolt, it'll perform the same with the freeflow or stock fire chamber.

[StrangeBalla55]

did the delrin stock have the bumper? The one I had did, but it was an 04 version.

[Ydna]

Nah they didn't use bumpers (not the one on the bolt nor the one on the bolt guide). If yours had one, it was probably because it passed through my shop at some point and I added it.