[Clarky17]

Hey looking for some help , will the A1 feedneck work on my 05 speed , since I can't locate 90 trigger frame , anyone know of a trigger that will work with my gun like a1 or g7 trigger? .. Thanks all

[sledneckforlife]

Originally Posted by Clarky17

Hey looking for some help , will the A1 feedneck work on my 05 speed , since I can't locate 90 trigger frame , anyone know of a trigger that will work with my gun like a1 or g7 trigger? .. Thanks all

You can modify a g7 trigger. I've modded a1 triggers to fit g7s and g7 triggers for gats.

[baggedbirds]

are you using the stock board?

You can use the CP G7 trigger but you will have to use the spring it comes with if you are using the stock board. There are no magnets on the CP trigger.


for what its worth, on my 05 speed I ran a CP trigger and ended up going back to the stock. IMO the stock trigger is smoother. The CP is lighter though.

[Clarky17]

yes stock board

[baggedbirds]

Originally Posted by Clarky17

yes stock board

If you go with the CP G7 trigger you are going to need something to return the trigger. It comes with a spring.

to be honest I know nothing about a G7 stock trigger. I have only seen a CP G7 trigger, never held a stock trigger in my hand.

[Clarky17]

Originally Posted by baggedbirds

If you go with the CP G7 trigger you are going to need something to return the trigger. It comes with a spring.

to be honest I know nothing about a G7 stock trigger. I have only seen a CP G7 trigger, never held a stock trigger in my hand.

ok man thanks alot for the help , mite give it a test run

[sledneckforlife]

Your 05 is opto board correct?? If so then if you buy a a1 or a g7 trigger , usually have to trim the tmfront part of the trigger. It's inside the frame so no one sees it. But honestly , best bet is to get a cp that fits your gun specifically- I spent a considerable amount of time getting it to work. Also, I don't believe that feed will fit, or allow the breech to open properly. Text if you have other questions 978/530/6747 Sent from my iPhone

[Clarky17]

Originally Posted by sledneckforlife

Your 05 is opto board correct?? If so then if you buy a a1 or a g7 trigger , usually have to trim the tmfront part of the trigger. It's inside the frame so no one sees it. But honestly , best bet is to get a cp that fits your gun specifically- I spent a considerable amount of time getting it to work. Also, I don't believe that feed will fit, or allow the breech to open properly. Text if you have other questions 978/530/6747 Sent from my iPhone

yes its opto board , my frame is 45 and i cant find a 45 trigger for my speed for life of me jus 90 trigger for 05 speed

[dr.strangelove]

The A1 feedneck will fit your gun, but may not allow your rotobreech to fully open.

Send a PM to Carapace about a 90 degree 05 Speed frame - he has one pulled from a Rasta 05 Speed that I believe he's looking to sell.

[baggedbirds]

Originally Posted by Clarky17

yes its opto board , my frame is 45 and i cant find a 45 trigger for my speed for life of me jus 90 trigger for 05 speed

what kind of triggers are you finding for a 90 that dont have a 45 also?

[Clarky17]

Originally Posted by baggedbirds

what kind of triggers are you finding for a 90 that dont have a 45 also?

Cp mostly , can't even find one 45 trigger for 05 speed

[baggedbirds]

Originally Posted by Clarky17

Cp mostly , can't even find one 45 trigger for 05 speed

yep, I can't think of a trigger that was listed for an 05 speed. The CP G7 is closeest I think you will get, but again you will lose the funtion of the magnets

Brad, what about acid customs? I couldn't find their site anymore.

[sledneckforlife]

When I get home at 5 ill drop you his contact info. Not cheap but some of the sickest triggers you will ever find. Quality is very good. Might take like 3-4 weeks to get , he's a one man army and is in Australia.