[m600]

Originally Posted by PIRANHA PAUL

wait, are you shooting co2? if so that will do it. Even if a gun is made for co2, it will still have side effects.

im using air mate

could it be the regulator? i mean this guns production ended a few years ago and i got it new in box, i heard somewhere that regs have to be set in or something? how many shots will this require?

[Monte Carlo]

im looking to replace the recock screw on my omen (1.0), and on the parts website listed in the first post (piranha-evil.com) it says "Note will fit all Omen models. Must use the new style valve body." Does that mean it will not fit my Omen? and if not does anyone know where i can get an original recock screw? lol

EDIT: ok figured that part out, I would have to buy a new valve body assembly which is like $55, (which probably costs more than the gun itself)

so im just wanting to know if there is someplace i can get the orignal recock screw Thanks.

[bballryand316]

Try contacting Bosspaintballproducts.com

[Monte Carlo]

Originally Posted by bballryand316

Try contacting Bosspaintballproducts.com

I did an he said he didnt have any...looks like im sol

[joey666crack]

Q- I don't know if this was previously asked, but mine always had a problem with Halo B's and force feeds.. The ball would be pushed in behind the cam and jam my gun. Can Halos be used? How?

[IamtheOrracle]

the problem i had with one was the ball would roll back due to inproper machining at mine would jam.

[paintball1296]

hey i know a lot of people say u cant use a halo with an omen but..... i have an Evil Omen 2.0 with board capable of 25 bps out of the box. i can also use a halo b loader with rip drive to achieve max feeding capabilities and it doesnt jam.

[Bizzity23]

hey i bought a used omen for wicked cheap. It was missing a few parts. I was wondering if anyone knew of a place where i could get a new rear block and screw.

[kekadowaki]

Q. i cant shoot my omen straight as what it was really to shoot straight how do i fix it

[mosesdryass]

I think I have a 1.5 model, because it came with the detonator but its asa doesn't have a gauge port and the lpc is tiny. How do I remove the lpc to get the valve out?

[FeWolf]

I need some grip panel and are these still serviced?

[atxpaintballer121]

Ok so i have a new problem i but a macro line on it but i keeps leaking form the macro connector in the asa. PLZZZZ!!!!!! HELP ME!!!!!!

[Nickdennis]

My evil omen has been leaking out of the barrel for a long time now and I have no idea why, I have tried replacing the reg, orings and it took it to several pro shops including skirmish and they have no idea why it is leaking. At this point I don't care about the leak as long as it shoots but it does not so I need someone to please help me out.

[bballryand316]

Leaking very heavily? Sounds like your cup seal is blown, it's behind the LPC. White plastic piece.

[grendal50]

if they have any left this kit still has the cup seal

http://www.ansgear.com/Evil_Omen_Del...skitdeluxe.htm

[HiMom]

How can I adjust the BPS on these I just acquired a 1.0 and it shoots like 7bps

[ogti9g9]

Omen 2.0 solonoid wont actuate, i need help.

the electronics turn on fine, but wont fire. I dont see any loose wires.

[Dstoen]

I have an evil omen and it is not recocking. I dry fired it with a almost empty tank and adjusted that recock screw and it worked great. I went and filled my tank and tried to fire it but it then again would not recock. I am using co2, would it have anything to do With the pressure? Would really appriate any advice, for it has not worked for five years!!!!!!!!!
Please help