Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 09-25-2015, 11:51 PM #127
Jaccen
 
 
Jaccen's Avatar
 
Join Date: Oct 2011
Location: SW Ontario
Side note: I did the LPR mod where one drills through the adjustment nut. I tried to drill through the "coin," but was unable to. I, initially, did not see an appreciable difference. My Quest had some............character. At first gas up, the LPR gauge would always spike to ~150psi or more. I'd solve that by degassing and then regassing. It would then always go to ~80psi.

I took the adjustment nut with the drilled hole and also cut a small "channel" across the back of it. I did not cut into the threads. It now gasses up to 80psi on first gas up.

I thought I had a bad LPR schraeder initially, but I've gassed up with the housing off and had no leaks. Either way, the Juit mod has eliminated my Quest's quirk. I won't know how it shoots until I get her out to game. Thanks again.
__________________
MCB Feedback
Please ship to me using US Postal Service.
Don't ship to Canada? No worries--I can work it out with you: US Parcel Pickup
Jaccen is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 09-26-2015, 09:31 AM #128
juit
CHEECH IS G@I
 
juit's Avatar
 
Join Date: May 2008
Location: mission
juit supports Team VICIOUS
juit is for the Gunfight
juit posts videos on PbNation
juit has achieved Level 2 in PbNation Pursuit
juit has perfected Level 2 in PbNation Pursuit
Ive seen washers with holes on ace hardware the ones for thin wood nails, take your quest coin and measure with all the washers

cut some grooves on the washer edges with a dremel disk, you need to do a groove on the sets screw to allow the air to flow better a + will be enough


glad this thread help you out you will see great improvement over a stock quest

Last edited by juit : 09-26-2015 at 09:34 AM.
juit is offline   Reply With Quote
Old 09-27-2015, 06:18 PM #129
Jaccen
 
 
Jaccen's Avatar
 
Join Date: Oct 2011
Location: SW Ontario
Any link to said washers? I, unfortunately (......fortunately?), am in Canada so Ace Hardware does not do business here. Though, if you have a link, I can look at the nearest Home Depot, Canadian Tire, Princess Auto, etc. for a similar product.

Thanks for ALL of your mods, Juit! While some may be less than appreciative, I am thankful for all the work and documentation you put forth in all of your mods. Many talk about the things they have done; you put up detailed guides and answer the questions of those who attempt them. For that, I am extremely grateful.
__________________
MCB Feedback
Please ship to me using US Postal Service.
Don't ship to Canada? No worries--I can work it out with you: US Parcel Pickup
Jaccen is offline   Reply With Quote
Old 09-27-2015, 10:22 PM #130
juit
CHEECH IS G@I
 
juit's Avatar
 
Join Date: May 2008
Location: mission
juit supports Team VICIOUS
juit is for the Gunfight
juit posts videos on PbNation
juit has achieved Level 2 in PbNation Pursuit
juit has perfected Level 2 in PbNation Pursuit
no prob bro Im here to help

home depot have them too, they have a nuts and bolts section
juit is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump