Hi everyone, im looking to get some custom milling done to my Geo3, anyone know if this will cause any problems? if it wont then who knows a good design to do?
Theres not alot of material left on most newer guns, any milling that you get done would likely be minimal
Assuming you could find someone willing to design a pattern for you, design fixturing, and perform the operations for you its probably going to be a hassle. But in the end its about what you want
I dont know what i want EXACTLY but,, i would like it to get a more Luxe shape but that isnt possible obviously so just something close, so take off as much as possible and make it lighter and curvy? Possible?
__________________ Inspire Photography <-- My photography page Boneyard Paintball in Plymouth, WI Stinger Paintball Designs for your custom grips
"Reminds me of the kids that bolt on exhausts, wings and vinyl cutouts onto their rice mobiles and then hate on a ground up resto rodded 69 Camaro" -OPBN
"Due to the Berzerkers rep and knowledge of Mag awesomeness, the opposing team dropped their markers and are actually out of the frame curled up in fetal positions" -OPBN... Again
if you send me a geo and a luxe plus a little bit of cash I will machine the innerds of the luxe to accept the innerds from the geo so you can have a geo in a luxe body...
disclaimer: you minght notice that your geo-luxe performs more like a luxe and nothing like a geo. this is normal. also you will notice that the geo mechanism inside the luxe has been skillfully modified to look exactly like luxe internals
__________________ Inspire Photography <-- My photography page Boneyard Paintball in Plymouth, WI Stinger Paintball Designs for your custom grips
"Reminds me of the kids that bolt on exhausts, wings and vinyl cutouts onto their rice mobiles and then hate on a ground up resto rodded 69 Camaro" -OPBN
"Due to the Berzerkers rep and knowledge of Mag awesomeness, the opposing team dropped their markers and are actually out of the frame curled up in fetal positions" -OPBN... Again
if you send me a geo and a luxe plus a little bit of cash I will machine the innerds of the luxe to accept the innerds from the geo so you can have a geo in a luxe body...
disclaimer: you minght notice that your geo-luxe performs more like a luxe and nothing like a geo. this is normal. also you will notice that the geo mechanism inside the luxe has been skillfully modified to look exactly like luxe internals
Like stated before theres not enough material ledt to really work with. at most you might be able to mill down some edges, rounding them off. But thats probably it.
if you send me a geo and a luxe plus a little bit of cash I will machine the innerds of the luxe to accept the innerds from the geo so you can have a geo in a luxe body...
disclaimer: you minght notice that your geo-luxe performs more like a luxe and nothing like a geo. this is normal. also you will notice that the geo mechanism inside the luxe has been skillfully modified to look exactly like luxe internals
Get a good set of calipers and a copy of a 3D design program like Solidworks and recreate the body of the geo on your program. Then you can do designs that can be milled out and send the file to a cad/cam program and mill it. Thats what I'd do.
hahaha
Your Privacy Choices