System X NME F.A.Q.

Nikilwig · 06-26-2007, 11:01 PM

Go to Wickedairsports.com and download the NME manual for the WAS board, it's very informative just make sure to read carefully. It's very simple once you get the hang of it.

ice_beachball · 10-01-2007, 12:55 AM

teammate used his and supposedly got an inner air leak...he said he took out the rammer sleeve and put an oring on there...well i dont think he knows what the rammer sleeve is and hes thinking something else...he used the word tube...well when i air it up the bolt is forced back and will not cycle...you can hear it trying to shoot but it will not cycle at all...the bolt only moves a little...i have not had much time to mess with the gun but i think it might be something to do with his LPR...it is running at 90 operating pressure. he supposedly replaced an oring and i think in putting it back together he screwed something up...someone help me?...pm me

Wulf1010 · 10-01-2007, 01:04 AM

your better off posting in the forum proper then in the FAQs....look up JamesHaun hes our resident mr.fixit

James_Haun · 10-01-2007, 01:12 AM

Damn right I am, lol thanks for the props. Oh and people I have decided to stay loyal and keep my NME I am going to delete my FST thread.

Wulf1010 · 10-01-2007, 01:14 AM

after i just made a comment like that in the FAQs, YOU'D BETTER

wickedballer · 12-06-2007, 07:05 PM

I am fairly new in the paintball scene. I have been playing woodsball for a couple of years with a cheap walmart spyder. (getting my butt handed to me on a platter every time) Last month i bought a Tippman a5 steath, got the scope,flatline barrel, mean looking shroud scope, the works. Went out and got my butt handed to me again. So i sold it after one game and just purchased a used almost new system x nme included was a new tank, tank cover and a empire b2 hopper. I hope this will do the trick for me. My question is that the dude i am buying it from recommended that i get a orange carbon bolt for it. But he said that the gun kicks major butt the way it is. He also recommended a virtue board if i felt that i needed to upgrade. I went to different sites and could find nothing for the system x. He said that intimidator parts would work. Any advice???

PrOtOmAn3 · 12-06-2007, 08:02 PM

Quote:

Originally Posted by wickedballer

I am fairly new in the paintball scene. I have been playing woodsball for a couple of years with a cheap walmart spyder. (getting my butt handed to me on a platter every time) Last month i bought a Tippman a5 steath, got the scope,flatline barrel, mean looking shroud scope, the works. Went out and got my butt handed to me again. So i sold it after one game and just purchased a used almost new system x nme included was a new tank, tank cover and a empire b2 hopper. I hope this will do the trick for me. My question is that the dude i am buying it from recommended that i get a orange carbon bolt for it. But he said that the gun kicks major butt the way it is. He also recommended a virtue board if i felt that i needed to upgrade. I went to different sites and could find nothing for the system x. He said that intimidator parts would work. Any advice???

Well atleast you didn't make a new thread.

First off, THE GUN DOES NOT MAKE THE PLAYER!! If you think that buying a higher end marker like a NME will make you better, you are mistaken.

Honestly, if you've been playing for under 3-4 months, your going to get beat, face it. But getting your *** kicked teaches you what to and what not to do. Keep playing and play other courses. You have a tournament grade gun now, so it might be good to start playing air ball, or speed ball. Getting better takes time and effort.

As far as the bolt and boards go, Timmy stuff will work just fine, but double check here, or go read the "parts" sticky before you buy something that won't work.. It has links and everything you need.

Hope this helps.

wickedballer · 12-06-2007, 08:06 PM

OK, thanks for the help. But i dont know what a sticky is or how to find them??? I am new to this site.

PrOtOmAn3 · 12-06-2007, 08:10 PM

I'll Pm you to keep this thread on topic.

Brandon(ca$h~Money) · 01-31-2008, 12:02 PM

what type of noid does the nme use?

speedair2 · 02-17-2008, 09:18 PM

i have a nme olive dust and im trying to sell it any ideas

seth700 · 05-23-2008, 01:46 PM

Post 1 of 5 sorry guys at least I own an NME.

magman687 · 05-23-2008, 06:38 PM

Quote:

Originally Posted by seth700

Post 1 of 5 sorry guys at least I own an NME.

im really lost on this????????

magman687 · 05-31-2008, 01:01 PM

any1 want to fill me in i still dont get it?

shaferbruce · 06-18-2008, 06:58 AM

will a cocker front block lpr fit in the nme le's lpr's place??? sorry if that sounds confusing... i just dont like the long *** stock lpr.... wanting a smaller one ...

James_Haun · 06-18-2008, 01:55 PM

NO! A cocker front block will not fit on the NME. You can get a palmers rock made for the Oddysey 03 markers and it will fit.

Wulf1010 · 06-18-2008, 03:11 PM

get a palmers micro rock built for the o3x, R3 it shortens the profile a bit an increases the airflow.

shaferbruce · 06-18-2008, 03:50 PM

whats o3x or whatever and why wont a dye lpr for a cocker work?? cuz i have one from an old cocker i took apart

Wulf1010 · 06-19-2008, 02:30 AM

the DYE cocker lprs arnt what id call ....decent LOL. The R3 by REX is just a copy of the older o3x by odyssey.

http://www.palmer-pursuit.com/cart/i...ducts _id=696
will screw strait into the volumizer already on the front block of the NME, thats probobly the best lpr on the market besides the STDs which arnt made in any configuration we can use on your NMEs with out some special work.

nrs0002 · 11-09-2008, 07:03 PM

Where can I find a user manual for my nme?

shelbycooper · 11-14-2008, 04:03 PM

hey i'm debating on selling/trading my nme... it's pink w/ polished black parts & limited edition, but i don't even know what to possibly ask for it... what would you ask for it????