This post was previously a News Up advertisement and has since expired. The content of this post has been masked due to the expiration. If you would like to revive the contents of this post click here to add News Ups to this thread.
The Virtue Spire is the next generation in loader technology with a shot activated sensor, jam-proof feeding system and a tool-less design that can be taken apart and reassembled in seconds. Not only is the Spire an aggressive, lightweight, and compact design, but it also holds more paint than the leading competitors.
• Shot Activated G-Force Sensor Technology
• Simple Two-Step, Tool-less Disassembly
• Feeds Super Fragile Paint
• Ultra Fast, Never Jams
• True 200™ Capacity
• Lowest Profile in Paintball
• Long Battery Life
• Hassle Free Operation
The Spire is the first “non-aftermarket” product by Virtue, which allowed us to design and optimized the hardware and software from the ground up.
Fast and Jam-Proof Feeding
With an Intelligent Shot Activated G-Force sensor, the Spire sits at the top with the fastest feeding loaders in paintball, but speed doesn’t count for much unless a hopper can also feed reliably without jams. The Spring Loaded Anti-Jam Paddle seamlessly prevents jams by sliding underneath and pushing jams out of the way before a pause in feeding occurs.
High Capacity in a Small Package
Play with a smaller profile thanks to the vertically stacked gearbox and the unique angular shape of the Spire. By housing the gearbox in a vertical stack inside of the Spire Drive™, the Spire has the lowest height, and narrowest front profile in paintball. Not only that, but the Spire’s True 200™ rating is not just an optimistic product description--the Spire actually holds 200+ paintballs.
Fastest To Take Apart and Reassemble
Changing batteries, cleaning the hopper, and most importantly, putting it all back together again was never so easy. The Slide Lock Quick Release allows the back shell to be removed in less time than it takes to read this sentence. From there, all of the Spire internals are mounted on an internal tray, which is quickly removed with the slide of the convenient Tray Release Tab.
Soft on Brittle Paint
If the gun can shoot it, the Spire’s Flex Cycle will feed it. The Flex Cycle’s rubber arms have a soft touch, which feeds brittle paint with ease. The Spire has been tested successfully on high end tournament paints so brittle they break when dropped from knee height!
Monitor Paint Levels at a Single Glance
Never start a game with less than a full loader, and stop wasting precious time opening the lid to see how much paint is left during crucial moments. A translucent backshell allows the shooter to quickly view paint levels in a single glance, without revealing how much paint is in the loader to everyone else.
High Performance That’s Easy to Use
Reload with ease thanks to the extra large wide mouth lid. Breathe a sigh of relief with the simple “on/off” operation, featuring self-optimizing motor logic. This means more time playing on the field without fiddling with settings. But die-hard tweakers don’t worry, as the Spire still has some adjustable settings for those who prefer to tinker.
Durable Construction
The Spire front and bottom shells are made of rugged glass-filled nylon, while the back shell is made from impact modified lexan.
Quick Change Speed Feed
The Optional Spire Crown2 comes with its own built-in hinged lid for easy bag-reloading in the pits with a secure snap fit. When those rain clouds make an appearance, the Spire Crown2 Quick Release back shell allows for changing back and forth from Speed Feed to Lid in mere seconds.
Key Features
• Tool-less Disassembly: Slide Lock Quick Release Button for easy, tool-less disassembly.
• Flex Cycle Paddle: Rubber Flex Cycle allows the Spire to feed even the most brittle paint.
• Spring Loaded Anti-jam Drive: Slides underneath and pushes jams out of the way before they occur.
• Shot Activated Sensor: Intelligent G-Force Sensor isolates and detects acceleration from each shot.
• Aggressive Low Profile Styling: Adds approx. 4” of height to the gun as a result of spacing saving with the vertically stacked gearbox.
• Single Tray Internal Construction: All of the Spire internals are attached to a single tray for easy removal.
• Transparent Back Shell: View paint levels in a single glance without showing everyone else.
• True 200™ Capacity: High ball capacity holds 200+ paintballs.
• Self-Optimizing Motor: Monitors motor torque and the G-force sensor to optimize performance.
• Quick Change Speed feed: Optional Crown2 changes back and forth from Speed Feed to Lid in seconds.
• Wide Mouth Lid: Huge lid opening for easy reloading.
• Extremely Tough Shells: Front, Bottom & Back Shells made from reinforced, impact modified materials.
• Internally Sorting Spire Drive: Spire shaped drive funnels and feeds paint, while reducing stack pressure.
• Reball Ready: Works with most Reballs™ and other branded reusable paintballs.
• Internal Dampening Cushion: Internal pad protects fragile paint from impacts in the front of the shell caused by running or diving and also reduces sound.
• Electronic Force Feed Button: Press the LED cover to manually force the Spire to spin.
• Adjustable Settings: Speaker, LED control, Standby, Sensitivity, and Factory Reset.
• Water Resistant Electronics: Conformal coated electronics protect the circuitry from moisture and paint.
• Audible, Instant-on: Push button on/off with audible speaker feedback.
• Long Battery Life: Ultra long battery life from 3 AA batteries.
Specifications
• CAPACITY: 200+
• BATTERIES: 3 AA
• LENGTH: 9″
• WIDTH: 4″
• HEIGHT: 4″
• WEIGHT: 16.5oz
• WARRANTY: 90 Days
• COLORS: Black or White
• Patent Pending
__________________
"Originally posted by EastCoastAngel: He came up under gen bolder....I thought it was a ****ty chick....turns out I was half right....he status updates like a drunk whore"
"Originally posted by B*FordPRO: I dont read the manuals to guns, I just shoot them and hope they work. If not, I have a tech do that for me. (This is what you call baller status and I am a baller)."
No Upping threads. If you have something to say, please do, but don't post in the thread just to take it to the top of the forum.
Do not post "1st post", "1st", "First post" or anything similar (or with any other number) at any point in a thread, even if you post a comment too. It is really annoying and it will result in a ban.
If you don't like something, say why instead of just calling it ugly, lame, gay or any other name. If it is old, simply post a link or report the post with a link to the older News thread.
Please don't post links for places to buy items. That encourages stores, sponsored players and other people to do it and spam the site.
New Hopper by Virtue Paintball: The Spire
This post was previously a 
Your Privacy Choices