so here is the new trend in europe
many people currently throw their markers in the oven and let the anno change the color ^^
if you want to do it here are some instructions (i dont take responsibility if you **** it up)
- take your gun apart and clean it with pure alcohol or any other real good stuff for cleaning
- take off stickers and orings and make sure no screws are left or any electronical devices.
- put the parts on thin foil and and put them in the oven on 200- 250 ° celcius
- wait for a few hours (between 2 and even more for other markers)
- let it cool down
- check out the color
if you want you could also try to put some sort of lub or anything else on the gun and it will affect the color
here are some results: (remember i dont take responsibility for mistakes)
cyborg 06 (red/black fade) all black parts from borgs turn in a nice doo doo brown
proto rail (used to be black once turned into a nice brown)
ion body
shocker barrel back (used to be same color as the rest of the gun)
ego ccu kit (used to be deep red)
ego barrel (used to be gun metal grey)
enjoy