[toon]

Originally posted by Baboon
the speeds are having a load of problems right now, if you are going to buy an angel dont get a speed, just get an ir3, even though angels suck and you should just get an e class.

very informative......
Most speed problems are due to not being properly set up. If you know what you are doing, you won't run into problems. Another even better way out is to purchase it from a reputable angel dealer. TAG comes to mind here. He will set it up for you so that all you need to do is add air, add paint, charge marker and have fun.
I was looking at getting either a la-soya timmy, FLy IR3, speed, E-mag, or a Trix. I test fired all of them except the e-mag. I ended up buying a Speed & todate, no regrets. The main thing is to get it set up right.

[Lone Wolf2]

the speeds are having a load of problems right now, if you are going to buy an angel dont get a speed, just get an ir3, even though angels suck and you should just get an e class.

STFU newb.

[meowwwwwww]

ok i have been looking through the forum and see a bunch of stuff on high pressure tanks. my max flow= the biggest POS ever invented is gone and now the only thing i have is an 88 ci high output tank will the hurt an spped at all jw?

[jase_ace]

jst outa curiousity how do u get a BPS reading off one of those red chronographs???

Jason

[Syentific]

meowwwwwww: For one, NO, your hp screw-in will work fine with the speed. Secondly, I can only entertain one of two options when it comes to your max-flo.

The first being that you bought it from someone who didnt take care of it and you are/were not willing to perform the needed maintenance; or that you just don't know what you are doing and/or talking about.

[meowwwwwww]

no i bought i new and the spring has broken 3 times. and that would be my 4th max flow so i think i no what im doing. plus it leaks after every fill that can be stopped by shoving an allen wrench in the nipple all around a bad max flow. ill be getting the apoc cause american air nos what there doing, and they back there products with lifetime warrenties

[bladecrazed]

speed's rule-
get one from tag because it comes with a very expensive $200 life warranty for only $50 bux over the original $950 price.

rockin out.

[bladecrazed]

aye mike great job on the videos by the way.

[bnkrmnky]

the cheapest i've found it for so far was at www.300fpspaintball.com... for like $940.99

[bnkrmnky]

it's www.300fpspaintball.com I screwed up and put ... after it

[meowwwwwww]

i have seen the for 925 on shop4paintball.com and i have seen the on another web site for 950 with a free case of paint and free shipping...

[alphakry]

http://www.topchoicepaintball.com/detail.asp?pid=74131
$899

[Dr Bob]

Quick Question Regarding efficiency.

I took a look at the TAG link about the Dirt Volumizers.

After adding volumizer gun was shooting in the 330fps range. We then started lowering the input pressure to get the velocity under the 300 mark. We got a steady 290fps shot with 260psi going into the gun at this point

Would this be more efficient then:

We then increased the dwell to 11 (from the original 8) and our velocity increased again to the 330+ mark. After making several input pressure adjustments we finally settled at 175psi for a 290+/- shot.

Cheers,

Paul.

[angel_shooter_2298]

Originally posted by Kahuda
ya if u could find a loader that could feed that fast. remember that HALO B's only feed bout 22-24 bps.

halo b burst speed is 50bps

[ft57]

Interesting...

[Infection5]

Originally posted by bladecrazed
speed's rule-
get one from tag because it comes with a very expensive $200 life warranty for only $50 bux over the original $950 price.

rockin out.

[MikeKess]

whats the difference between sensi mode 1 and 3?

[MikeKess]

whats the difference between sensi mode 1 and 3?

[DaveEllis]

Could someone post some Info on how to set up your Speed.

Like what to adjust, I know velocity is adjusted via the Mini reg, but do you have to set up the LPR, etc.


Edit-And the manuel doesn't go in deep how to set it up, I"ve read Ken Cranes set up tips on what dwell should be and the like.