[defalk]

this is'a mail send to a vanguard service



>Dear Sir,
>I'm heaving problem with leeks coming out of the solenoid VANGUARD CREED V2 . More precisely
from
>the two holes on the side facing down (in the attached pictures those ones
i'm
>pointing with my finger). I've already disassembled the solenoid and checked
>the seal. Everything looks fine. It seems to be related to the little piston
>inside it that should lock the breaches. I've watched the videos made by
>vanguard tecks but they dont get to the piston so I really don't know how to
>check it. Do you have any suggestion on how i should move?
>I hope the infos i gave you will result precice in order to help you
>understanding it. If you need more just ask for it.
>the marker is new i'm buyed in 12-11-2011- from vanguard UK


>Best regards,

I have never been contacted - if someone can help me

VERY BAD SERVICE
VERY BAD COMPANY
VERY BAD MARKER VANGUARD CREED V2

[jason_vanguard]

Sorry to here about these issues,
Who did you send the e mail to? This is not how Vanguard operate, I would like to get more information please.

[MstrKey]

It would also be important to note that most solenoid leaks are not a solenoid issue at all. You may have actually done more damage taking it apart.

[zyxin]

Have a mate who had the same problem. It was fixed by changing the the rear 15x2 o-ring on the LPR assembly. It was nicked when reassembled after maintenance. (I think vanguard calls it supercharging).

[xGrasby21]

i have to agree, the service is HORRIBLE. i called about my creed and have had it sent it, to have them look at it. they sent it back not fixed, with nothing saying on whats going on with it, and will not email the tech back. very bad service. and now i haave to buy a $100 part for a gun that has a case threw it, horrible marker aswelll. same boat

[jason_vanguard]

Originally Posted by xGrasby21

i have to agree, the service is HORRIBLE. i called about my creed and have had it sent it, to have them look at it. they sent it back not fixed, with nothing saying on whats going on with it, and will not email the tech back. very bad service. and now i haave to buy a $100 part for a gun that has a case threw it, horrible marker aswelll. same boat

I have e mailed you back, and await your reply as to where you sent your marker in for repair.
Jason

[defalk]

martin@vanguardpaintball.com

[defalk]

jason send me a solenoid - the cost of the shipmant to uk is to much

[jason_vanguard]

Originally Posted by defalk

this is'a mail send to a vanguard service



>Dear Sir,
>I'm heaving problem with leeks coming out of the solenoid VANGUARD CREED V2 . More precisely
from
>the two holes on the side facing down (in the attached pictures those ones
i'm
>pointing with my finger). I've already disassembled the solenoid and checked
>the seal. Everything looks fine. It seems to be related to the little piston
>inside it that should lock the breaches. I've watched the videos made by
>vanguard tecks but they dont get to the piston so I really don't know how to
>check it. Do you have any suggestion on how i should move?
>I hope the infos i gave you will result precice in order to help you
>understanding it. If you need more just ask for it.
>the marker is new i'm buyed in 12-11-2011- from vanguard UK


>Best regards,

I have never been contacted - if someone can help me

VERY BAD SERVICE
VERY BAD COMPANY
VERY BAD MARKER VANGUARD CREED V2

Reply was sent promptly

-----Original Message-----
From: martin carnall [mailto:martin@vanguardpaintball.com]
Sent: 12 March 2012 15:50
To: 'defalk@libero.it'
Subject: RE: Vanguard Creed solenoid leek PROBLEM

Hi

There are 2 main reasons why this is leaking

1 there is dirt got into the niod

2 the lpr is over pressurising

Please check for over pressurising by trying to push the bolt forward with your fingers on the bolt pin if this is very hard it will be over pressurising.

If this is the case please rebuild the LPR (low pressure regulator )



Thanks martin

[jason_vanguard]

Originally Posted by defalk

jason send me a solenoid - the cost of the shipmant to uk is to much

Please e mail me your contact details
jason@vanguardpaintball.com

[defalk]

mon the original site was an other email. why?

[MstrKey]

The service centers have changed recently.