[itsalongshot]

Help guys,

I cut the 3 wires going to the charging/intellifeed jack on my LED and now can't find the paper I wrote the order in which the wires had to be soldered on (I was relocating it to the top...) I already know: What an idiot!

Anyway, looking at the picture below, does anyone know which wire goes with what hole?

Thanks a bunch!

[itsalongshot]

C'mon guys, I'm sure someone knows this one...

[Pk007]

This should help...

Pk

[Trinity]

If that is the intellifeed port then wires go to a and b, and it won't matter wich to where.but they come with grey to A and white to B

Trinity

[itsalongshot]

Ok, thanks pk and trinity,

I know which 3 wires go to the jack. What don't know is which one goes to what hole... That little tab in the jack is there to insure it only gets plugged-in in a certain order. That's what I need. Anyone?

[timebomb]

This is what you need, it shows the tab and where the wires go to it.

Good luck, and btw, to save myself from these headaches I gave $60 to Adrenalin and had them do it

MAKE SURE YOU KNOW THAT YOU'RE LOOKING AT THIS FROM THE INSIDE OF THE PLUG.

Mike

[itsalongshot]

Thanks a bunch Timebomb,

That's exactly what I needed

I would give it to someone to do, but we're kinda far from everything here and I'm a bit of a masochist

You're my heeeeeroooo!