Whats your lpr at? Are you extremely overboring (shooting xball with a 693 is a great example) your barrel to paint match? Sure theres no leaking or odd sound when you shoot?
Using freak system and matching bore close. LPR is about 80.
Marker is pretty loud, but otherwise one of the guys at the field said to check my dwell, but 8 is standard from what I am told, and I tried it lower with no noticible change. No leaking audible down barrel, near bolt/ram or anywhere from what I can tell. Has a new poppet(correct name for the white delrin washer?) and all new orings, lubed with dow 55.
I'm sure it's a very simple fix and has been asked many times, but my empire 1.5 board will not turn on! The battery is just fine as I tested it and it's nearly full energy, the membrane ribbon is in right and fine, the battery harness is perfectly fine. I can't figure out what it is, the board worked fine four days ago, then I put my timmy in the trunk of my car because I was going to a friends house for the weekend then going to go balling on Sunday (never ended up going anyways) but nothing happened that should have done anything. Any ideas are greatly appreciated.
First off is my Empire 2:
I installed an Eigenram and new(lighter) valve spring and some Hi-Flow barbs and hosing on Saturday. On Sunday, I went to play and set my LPR to about 60psi and chronoed 279, 277, 281, 277. Played the whole day(a very hot day, I think the temp got in excess of 100*) without a problem up until at the very end of the day when I started getting serious shoot down problems when ramping on PSP. What could be going wrong?
Second is my friends 2k5:
Same situation on Sunday(I think he was also running at 60 psi, minus the Eigenram and lighter valve spring). It was operating fine all day(he was ramping all day) up until the last game when he started getting shoot down. So I went back with him to the chrono area to see what the problem was and the gun wouldn't even shoot. It would pressurize at the LPR but it wouldn't move the bolt at all. I took it apart and the air that should have been going out the other end of the solenoid was instead shooting out of the holes towards the front of the solenoid(left/barrel side). Is this fixable or do I have to send it to BLAST?
__________________ Vaccinated with the lead of 1000 rounds.
Hell hath no fury? Well it does now
Battery reads 8.9V, isn't that high enough? And do I need to lube the regs or just the valve and what not? Because I lubed the ram sleeve and ram with dow55 when I reassembled it.
__________________ Vaccinated with the lead of 1000 rounds.
Hell hath no fury? Well it does now
ok guys everytime i air up my gun its fine. i take one shot and i get horrible leak out the tip. i think its somthing with the lpr but have no idea what you guys think
ok guys everytime i air up my gun its fine. i take one shot and i get horrible leak out the tip. i think its somthing with the lpr but have no idea what you guys think
Ok, so today I decided to air up my ripper 3. I used it ~2 weeks ago, it worked fine, I lubed it up, and then put it back in my closet. Today, I pull it out, air it up, and it starts blowing air out of what I think would be the breach, but I'm not 100% sure. In the video, sorry for my breathing, the camera was right in front of me and it picks up on any sound signature. Any ideas on what is wrong? And what I could do to fix it?
ok i dont understand why on force my gun wont shoot more then 10, even though on the modes it is capped at 16. can anyone help?
Are your eyes working? It sounds to me like they might be rooted, I know on my dark if my eyes aren't working it gets capped to 9bps, also if your ram is adjustable it may be set to far back and the paint may move out of "sight" of the eyes.