[enemy master]

So i just got a team avalanche demon 2013ed and the gun has been used and abused. There is like 50,000 shots on so the internals are raw and scuffed up. I see that pooty has a polished annoed demon bolt. Can someone tap the inside of the bolt so it can work with the 2013 internals and the spring? I polished the bolt i have, but it has some deep grooves in the bolt. Can someone mod the stock bolt to work on a 2013?

[juggernaught_lives]

Originally Posted by enemy master

So i just got a team avalanche demon 2013ed and the gun has been used and abused. There is like 50,000 shots on so the internals are raw and scuffed up. I see that pooty has a polished annoed demon bolt. Can someone tap the inside of the bolt so it can work with the 2013 internals and the spring? I polished the bolt i have, but it has some deep grooves in the bolt. Can someone mod the stock bolt to work on a 2013?

2012 bolt has less meat in it. the 2013 has a step inside where the spring rest. so to answer your question, the stock 2012 bolt can not be modded to be used with the spring.

[enemy master]

Dang. Any idea how much to buy a new bolt?

[Mattcar]

50 000 is 25 box of paint.... that not what I call used and abused...


is the gun not working properly or something?

[enemy master]

Thats what the new board says because they replaced it awhile ago. The bolt has some good grooves in it telling me it was used pretty good. It's not a problem i'm just rebuilding this gun so it is like almost new. The gun shoots good still. haha

[WildWayz]

Photos please

There should be no scuffs unless it is a machining defect, or dirt got inside and scratched it.

However, I did once work on someone's Demon that was bashed up like that too...

[moneytable]

Originally Posted by enemy master

Thats what the new board says because they replaced it awhile ago. The bolt has some good grooves in it telling me it was used pretty good. It's not a problem i'm just rebuilding this gun so it is like almost new. The gun shoots good still. haha

Just shoot that god dam gun don't worry about scratches or making it look new,eventually they will get scratches dings no matter how careful you are.

[MstrKey]

Heck ya, if it works leave it alone and enjoy. A scruffed working gun in hand is worth three pretty unused ones in the closet.

[spatanen]

Originally Posted by juggernaught_lives

2012 bolt has less meat in it. the 2013 has a step inside where the spring rest. so to answer your question, the stock 2012 bolt can not be modded to be used with the spring.

not the 2013 spring but its possible to spring mod a 2012 demon

[juggernaught_lives]

Originally Posted by spatanen

not the 2013 spring but its possible to spring mod a 2012 demon

If you spring mod the 2012 bolt, you will change the ID of the rear of the bolt causing it to be non functional.

The sprung 2012 bolts are the same as the ones in the 2013 Demons


2012 Bolt


2013 Bolt



2012 Bolt


2013 Bolt

[enemy master]

I can see the outside of your bolt is nice and buttery smooth at the back. Mine had a bunch of scratches and even when i buff the bolt I cant get rid of the deep ones. ill try and get some pictures