[smasher41]

the_kwa,

congrats on the nice install so far, one qestion, did you just push the wires into the 14 way's connector? LOL.

The only gripe i have on the morlock boards is the on board LED, otherwise they are very kick *** little boards.

[the_kwa]

Originally posted by smasher41
did you just push the wires into the 14 way's connector? LOL.

Haha! Yeah, I did just push them in for now, i'm still tring to find a quick disconect for a reasonable price...

These are what i've found so far...

[MindJob]

NICE

I have my LED body on its way back from TAG from drilling it for the eyes and removing a stripped breech rod.

How did you mount the board inside the grip? is there a screw?

[the_kwa]

Originally posted by MindJob
How did you mount the board inside the grip? is there a screw?

no screw, the foam and bat. are holding it in place just fine...

[smasher41]

hmm inline quick disconnects to fit the stock angel connectors.... hmmmmm




like these?

[Winnebago]

purty!

[the_kwa]

Originally posted by smasher41
hmm inline quick disconnects to fit the stock angel connectors.... hmmmmm

Where can i get some and how much?

[the_kwa]

there's some pictures of the finished product....

[smasher41]

i tried to hit you up on aim about the conectors, but u werent online.

end up finding them or ripping them off a stock board?

[the_kwa]

i took the hopper intelli feed conector off my LCD board, that way if i ever need the board again, i'll still work

[smasher41]

heh, i had a few donor Speed boards laying around, after some research, i found em muahahahha! i'd get the crimpers for connectors like the noid has, but i dont think i want to drop $450 on them just yet.

btw, did you go the 66mm back or did you go a bit farther to get the eye elements under the eye cover on the ball detent side?

[ProBaller1102]

that is a tight gun i got to get me one of them

[the_kwa]

Originally posted by smasher41
btw, did you go the 66mm back or did you go a bit farther to get the eye elements under the eye cover on the ball detent side?

i'm about 67mm back, but I turned my ball detent down on a lathe today and it fits like butter now

ProBaller1102 - maybe someday i'll let you shoot it

[smasher41]

lathe, im jealous! i have to get others to make me new toys with lathes
all i can say is 6 and 10 gram hammers are very cool to have in a fly

i had to give aobut an extra mm on my ironman also cause of the ball detent, ordered a cobra indestruct while im at it, they have cut down sides( flats for a wrench) which should help give the eye cover some more room.

[the_kwa]

i'm a machining student in college, so have a BUNCH of machines at my disposal...

i'll take a pic of the shop tomorrow if i remeber

[smasher41]

Hmm, i think i may have found what i want to do in college now. muahhahahah!

do you have cnc mills by chance?

[the_kwa]

My Angel

there's the vid..

[o2cocker]

awww the poor doggys

[the_kwa]

Tyler Humphrey's old Flipmode LED..
Kapp LCD Frame
Kapp ASA
LCD Valve
Shocktech LPR
Shocktech HPR
Lucky LCD Board w/******
Lucky Laser Eye's (white)
Eclipse Eye Covers
CCM Mid Rise
Dye Ultralite