http://www.youtube.com/watch?v=8S1p1XgORuk
I saw this video months ago and it really sparked my imagination after I looked everywhere trying to find either an autococker with the kit already installed or just the kit itself. I eventually gave up trying to find, one so I broke out my calliper and starting measuring some cocker grip frames and inputting the dimensions into Rhino 3D 3.0. So far this is what I’ve come up with . . .
Now all I needa do is finish up drawing my custom front block which will just add a second hole for another 3-way: after that I needa find a good machine shop to take it to. My plan is to get a barb splitter and split the air flow from the LPR into each 3-way. The second 3 way will be on the left side of the block and will be actuated by the pump arm just like with the Boston reflex cocker; then I'll run the hoses into the grip frame to the second ram inside it. If there are any drafters out there I could really use some help on how exactly to dimension/label threads, the help would be much appreciated. Lastly if anyone has/knows the thread count for the Rams, 3-Ways, and LRP's that info would also be appreciated.